Operating System - HP-UX
1838241 Members
3516 Online
110125 Solutions
New Discussion

Configuring A6795A PCI Fibre Channel Adapter

 
SOLVED
Go to solution
Suren Selva_1
Advisor

Configuring A6795A PCI Fibre Channel Adapter

Hello All,

I have to configure two Fibre Channel adapters in Unix 11.00. There was no documentation with the cards. Where can I find the drivers and prerequisite patches etc? Please let me know.

Thanks in Advance,
Suren Selva
Live and let live!
5 REPLIES 5
Steven E. Protter
Exalted Contributor
Solution

Re: Configuring A6795A PCI Fibre Channel Adapter

You install the cards into the server.

11.00 driver
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=A6795A

2 GPs driver unknown OS.
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=A6795AEFI

This should be a solution.

The driver install will require a reboot. The links include any pre-requisite patches and such.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Joshua Scott
Honored Contributor

Re: Configuring A6795A PCI Fibre Channel Adapter

Alternatively, you can install the driver from the first Applications CD in your HP-UX media Kit. (Of course, this is difficult if you don't have a media kit.)

if your CDROM is mounted on /cdrom the path is:

/cdrom/A6795A

HTH!
What are the chances...
Joshua Scott
Honored Contributor

Re: Configuring A6795A PCI Fibre Channel Adapter

Also, You may have to install the

FC-TACHYON-TL

driver on the same CD.

What are the chances...
Uday_S_Ankolekar
Honored Contributor

Re: Configuring A6795A PCI Fibre Channel Adapter

Drievers should be available on Application CD ( it should be on # 1 CD if I am not wrong)

-USA..
Good Luck..