configuring nfs server and client

[madhudeepan]

how to configure nfs server and client

what are steps

ver hp-ux 11i v3

[Asif Sharif]

Hi,

Step by Step...
http://docs.hp.com/en/B1031-90061/ch02.html

Regards,
Asif Sharif

[Md. Farhan A Azam]

Hi,

There is two ways to create NFS, one from SAM and another is through command mode, To create the NFS through command, login in the server by using â Super Userâ id and password, and enter the full path of NFS mount point in â exportsâ file, export file will be in /etc/exports,

In Server Side:-
#vi /etc/exports
/mount1/dir2
{Put the full path, which need to be exported}

#exportfs -a


And in client side, make entry in /etc/fstab file as below,

#vi /etc/vfstab
nfsserver_host1:/mount1/dir2 /nfs_mount_point_in_client nfs rw 0 0

#mountall

(Modify the value as per your requirement)

thnx...farhan

[Md. Farhan A Azam]

One more thing...put the entry of both hosts in /etc/hosts file.


thnx...farhan

[Hakki Aydin Ucar]

did you read this doc ?

http://docs.hp.com/en/B5125-90001/ch03s04.html