1833875 Members
1671 Online
110063 Solutions
New Discussion

console problem

 
SOLVED
Go to solution
Daniel Barsalou
Occasional Contributor

console problem

HI,

I cancel my boot process to change the keyboard path, but I cannot change the path.

It send me an error:
Keyboard path cannot be modified.

I typed: PA Keyboard 0/6/2
(This is my USB card location)
(My keyboard is USB)

I cannot get my console on my video card propably caused by the keyboard path.

Is there a way to fix this?

Thank you.
7 REPLIES 7
Carsten Krege
Honored Contributor

Re: console problem

You should try to ask this question in the hardware forum.

Carsten
-------------------------------------------------------------------------------------------------
In the beginning the Universe was created. This has made a lot of people very angry and been widely regarded as a bad move. -- HhGttG
Kenneth Platz
Esteemed Contributor

Re: console problem

Daniel,

What model system is this? If this is an L-class or N-class system, I do not believe there is any way to change the console path to the USB keyboard device (the firmware does not support this).
I think, therefore I am... I think!
Daniel Barsalou
Occasional Contributor

Re: console problem

It's an a-class
A500

paul courry
Honored Contributor

Re: console problem

First of all, I'm talking from ignorance on the A500, but .......

If you wish to change your keyboard path on all other machines the correct syntax would be:

conspath 0/6/2

Anybody else out there, someone with real experience?
Kenneth Platz
Esteemed Contributor

Re: console problem

Daniel,

As far as I know, the firmware on the A500 does not support changing the console path or the keyboard path -- these are both set to the console port.

Have you installed a graphics adapter along with the USB card on this system? (Do they actually *work*?) The last I heard the only systems that this kit was supposed to work on were the L-class systems.
I think, therefore I am... I think!
Daniel Barsalou
Occasional Contributor

Re: console problem

Yes I have the graphic adapter + the USB card. It does work properly on the system.

I can get CDE working properly!

But, I CAN'T get the console on the screen. I must use teh serial port! (console port).

If the firmware doesn't support to change the keyboard path, does it mean that I will not be able to get the console on the video adapter?? (never?) No way???
Charles Slivkoff
Respected Contributor
Solution

Re: console problem

Daniel,

I would like to know how it is that you came to have this configuration. This is not a supported configuration. Was this recommended to you by someone?

To answer your question, no. It is not possible to direct the console path to the graphics card. This is also not possible in the L-Class server which does support this configuration.

If you would prefer to contact me directly to discuss this further, please feel free to do so.

E-mail: charles_slivkoff@hp.com
Telephone: +1 404-648-3112