CPU speed

[Christian Aguilar Varga]

Hi!
I have E-35 and E-25 servers with UNIX HP-UX 9.04.
What's the command to get the CPU speed in this version of unix?

[John Meissner]

not sure about that version... but for 10.2, 11.0, 11.11 I use this:

echo itick_per_tick/D | adb /stand/vmunix /dev/kmem

[Helen French]

Try from SAM and check the system properties (under performance monitors?)

Also, if you can interrupt the boot process and get to the boot console menu, check the available options there to see the system information.

[Pete Randall]

Christian,

No need for a command, I can tell you: It's S.L.O.W.

The E25 is 48 MHz and the E35 is 64 MHz.


Pete

[Geoff Wild]

Not too sure if this script will run...but you could try......

Called hpmem...

Rgds...Geoff

[Bruce Troutman]

geoff, I just did on an E25 and it worked fine. I would assign you some points if I could :)

[Rick Connelly_2]

Geoff, that is a cool script,
thanks for posting it

[SM_3]

Christian

what do you use the E servers for?

just curiosity.....

[Geoff Wild]

Rick - np.

Bruce - glad it worked...you can easily add more to it...

Christian, please check out:

http://66.34.90.71/ITRCForumsEtiquette/index.html

CA775399
ITRC member since: April 11, 2002
last contribution date: May 12, 2003
This member has assigned points to 6 of 68 responses to his/her questions.


:)