create a Lun with out the program command view

[Omar_43]

how can I create a Lun with out the program command view ?

[RAC_1]

man armdsp.

Anil

[Hoang Chi Cong_1]

See on the "armcfg" manpage.
For example:
To create a LUN numbered 5 with a capacity 30Gigabite associated with redundancy group 2 and the array's alias "Omar":

#armcfg -L 5 -a 30G -g 2 Omar

More detail,type:
#armcfg -?


Hope this helps
Regard,
HoangChiCong

[Naveej.K.A]

Hi Omar,

You can connect to the console of the Storage box and use the appropriate commands and create the LUN.

Some have a front panel and you can administrative tasks through the front panel as well

Regards,
Naveej

[Nguyen Anh Tien]

Hi all man.
armcfg and armdsp is command view command line tool.
If you use VA You can connect to VA by using serial line and have some tool.

[Omar_43]

Hi all

I will try with this command but I think that the array is not correctly installed because I can not see with sam

[Hoang Chi Cong_1]

Show me the output when execute "armdiscover -v" command!

[Omar_43]

Thaks every one for the help finaly
I can work with my array the problem was it array work with a samrt array 6400 so it only works with the comand
saconfig / dev/cissX