create stape driver

[Mousa55]

HI
How to a definition the 'stape' driver of the tape drive on my server(9000/8420(11.11i),
without create new kernel

thanks and best regards

[Luk Vandenbussche]

If the stape driver is not in the kernel then you need to add it to the kernel and reboot the server.

[Mousa55]

the driver is not in the kernel, but i added by using the SAM from ;kernel configuration'
But after addition
(pinding state ...> in
and current state ...> out
i don't know to change the current state) request from me create new kernel, i am don't need to this

thanks

[Joelmel Roche]

hi,
after adding new kernel you must exit the sam then "select create a new kernel now" and need to restart server before effect the the new create kernel driver.

[Anshumali]

You need to select the Actions, create new kernel now and it will prompt for auto restart.
Your previous kernel is saved as vmunix.prev as a backup in /stand
As always....take appropriate backups.

[Bill Hassell]

It is not possible to add the stape driver without a reboot.

[Marcel Burggraeve]

Nejad,

Asking the same question a couple of days later is not gonna give you a different solution.
Just like in http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1150567 people will keep on telling you that creating a new kernel and rebooting the system is the only way to solve your problem.
There really is no other way to put the stape driver in your running system.

[Peter Nikitka]

Hi,

besides rebooting your box, you should change this:

I have assigned points to 0 of 159 responses to my questions.

Look at
http://forums1.itrc.hp.com/service/forums/helptips.do?#33

mfG Peter