create the first vpar form Genesis n_Partition.

[HP UNIX Professionals]

Hi,

Anybody know how to create the first vpar form the Genesis n_Partition.

I know the procedure for creating Genesis n_par, anybody help me how to create the first vpar form this npar and give me the command also


Thanks in advance
Vinay

GSP:CM> CC

G - Genesis Complex Profile
L - Last Complex Profile
Select Profile: g

Enter Cabinet number: 0

Enter Slot number: 0

Do you want to modify the complex profile? (Y/[N]) y

-> The complex profile will be modified.
GSP:CM>

Enable the Boot:
GSP:CM> BO

[Torsten. · Accepted solution]

Go to http://docs.hp.com/en/vse.html to find the manual.

http://www.hp.com/go/hpux-vpars-docs


Find the

HP-UX Virtual Partitions Release Notes A.05.06 (HP-UX 11i v3) (T1335-91005, March 2010)

document. It has all the step by step procedures.

[Torsten.]

HP-UX Virtual Partitions Administrator Guide (includes A.05.06) (T1335-91006, March 2010)

is the administration manual.

[HP UNIX Professionals]

Hi Guys

I am already have these type of document but i want the steps only.

thanks

vinay

[melvyn burnard]

well it is all laid out in those documents, spend some time and read them

[atul2701]

Hi Vinay

its better to read some vpar admin guide posted above. But here is the brif overview on how create the vpar.

Boot your Genesis n_Partition & install the OS from ignite or media.
Modify your n-par if you want to add more cells.
Install v-par software.
Create the new vpar using vparcreate command.
if you want to create more than one vpar than create required no. of vpars using vparcreate command.
Install the os on remaining vpars.
Update the auto file (for pa risc "hpux /stand/vpmon" & for integrity "boot /stand/vpmon")
if your server is integrity server than change the booting environment to vpar.