HPE Community
Operating System - HP-UX
1836417 Members
2701 Online
110100 Solutions
New Discussion

Re: creating multiple vswitch with multiple NIC card (HPVM)

 
hp100001
Occasional Contributor

‎06-08-2007 01:07 PM

‎06-08-2007 01:07 PM

creating multiple vswitch with multiple NIC card (HPVM)

I want to creat multiple vswitch with multiple NIC card to maximize the speed with the same ip subnet. Can it be done? or better suggestion.
0 Kudos
Reply
3 REPLIES 3
Patrick Wallek
Honored Contributor

‎06-08-2007 01:10 PM

‎06-08-2007 01:10 PM

Re: creating multiple vswitch with multiple NIC card (HPVM)

If you are wanting to do what I think you want to do, then you need to purchase and use HP's auto port aggregation product.

HP Auto Port Aggregation
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=J4240AA
0 Kudos
Reply
hp100001
Occasional Contributor

‎06-08-2007 01:13 PM

‎06-08-2007 01:13 PM

Re: creating multiple vswitch with multiple NIC card (HPVM)

can I do without the APA software. While VM ware can assign independent ip address to each NIC for that function.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎06-08-2007 09:27 PM

‎06-08-2007 09:27 PM

Re: creating multiple vswitch with multiple NIC card (HPVM)

If you want to use multiple NICs and create only one vswitch on them, you need to install APA software on the VMHost.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.