CSTM error

[Ratheesh.G]

Hi ,
I have a rp4440 with hpux-11.11 installed. Yesterday I have removed the Online Dig, version- B.11.11.13.14 and installed the latest version-B.11.11.21.04. After that my CSTM doesnt work. when i execure cstm it throws the error "cstm, not found". Even i could not find the location for cstm. Can any one tell me how can i make ctsm functioning?
Thanks,
Vinu

[Johnson Punniyalingam]

>>when i execure cstm it throws the error "cstm, not found". Even i could not find the location for cstm<<

command to try

which cstm

or

find / -name cstm

[Michal Kapalka (mikap)]

hi,

the last time when i applied a newer version, i upgraded the existing version.

check this website :

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE


mikap

[Ratheesh.G]

Hi Johnson,
I already tried both..but failed to find the location for cstm executable.

[Ratheesh.G]

Hi Michal,
I already have the same version which is mentioned in the link which you given..But still i am unable to run cstm!!

# swlist | grep -i online
B3929DA 3.5-ga15-03 HP OnLineJFS 3.5
OnlineDiag B.11.11.21.04 HPUX 11.11 Support Tools Bundle, June 2009


# cstm
ksh: cstm: not found
# whereis cstm
cstm: /usr/share/man/man1m.Z/cstm.1m

[Duncan Edmonstone]

Vinu,

Output of:

swlist -l fileset -a state OnlineDiag

??

Thanks

Duncan

[Ratheesh.G]

Hi Duncan,
Below is the requested output.

# swlist -l fileset -a state OnlineDiag
# Initializing...
# Contacting target "aondusa5"...
#
# Target: aondusa5:/
#

# OnlineDiag
# OnlineDiag.Sup-Tool-Mgr
OnlineDiag.Sup-Tool-Mgr.RELEASE-NOTES configured
OnlineDiag.Sup-Tool-Mgr.STM-CATALOGS configured
OnlineDiag.Sup-Tool-Mgr.STM-MAN configured
OnlineDiag.Sup-Tool-Mgr.STM-SHLIBS configured
OnlineDiag.Sup-Tool-Mgr.STM-UUT-RUN configured
# OnlineDiag.EMS-KRMonitor
OnlineDiag.EMS-KRMonitor.KRMON-DRV-CMN configured
OnlineDiag.EMS-KRMonitor.KRMON-DRV-DRV configured
OnlineDiag.EMS-KRMonitor.KRMON-MAN configured
OnlineDiag.EMS-KRMonitor.KRMON-RUN configured
# OnlineDiag.Contrib-Tools
OnlineDiag.Contrib-Tools.CONTRIB configured
OnlineDiag.Contrib-Tools.PDCINFO configured
OnlineDiag.Contrib-Tools.PIMTOOL configured

[Duncan Edmonstone]

You are missing the OnlineDiag.Sup-Tool-Mgr.STM-UI-RUN fileset - probably because it is dependent on the OnlineDiag.EMS-Core and OnlineDiag.EMS-Config bundles which you also don't have.

Where did you get the depot from - does it not contain these EMS components? They need to be insatlled as well for the OnlineDiag.Sup-Tool-Mgr.STM-UI-RUN to instrall.

HTH

Duncan

[Michal Kapalka (mikap)]

hi,

i have this output on my systems :

# Initializing...
# Contacting target "sz1dbvr1"...
#
# Target: sz1dbvr1:/
#

# OnlineDiag
# OnlineDiag.Sup-Tool-Mgr
OnlineDiag.Sup-Tool-Mgr.RELEASE-NOTES configured
OnlineDiag.Sup-Tool-Mgr.STM-CATALOGS configured
OnlineDiag.Sup-Tool-Mgr.STM-MAN configured
OnlineDiag.Sup-Tool-Mgr.STM-SHLIBS configured
OnlineDiag.Sup-Tool-Mgr.STM-UI-RUN configured
OnlineDiag.Sup-Tool-Mgr.STM-UUT-RUN configured
# OnlineDiag.EMS-KRMonitor
OnlineDiag.EMS-KRMonitor.KRMON-DRV-CMN configured
OnlineDiag.EMS-KRMonitor.KRMON-DRV-DRV configured
OnlineDiag.EMS-KRMonitor.KRMON-MAN configured
OnlineDiag.EMS-KRMonitor.KRMON-RUN configured
# OnlineDiag.EMS-Core
OnlineDiag.EMS-Core.EMS-CORE configured
OnlineDiag.EMS-Core.EMS-MX configured
# OnlineDiag.EMS-Config
OnlineDiag.EMS-Config.EMS-GUI configured
# OnlineDiag.Contrib-Tools
OnlineDiag.Contrib-Tools.CONTRIB configured
OnlineDiag.Contrib-Tools.PDCINFO configured
OnlineDiag.Contrib-Tools.PIMTOOL configured

so somethings is missing in you system.

mikap

[Kapil Jha · Accepted solution]

Hi Rateesh,

You are missing EMS-Core component, you will have to download again the whole package and install it again.
would be better if you download it completely again [ forget last installation]

BR,
Kapil+