cstm selclass

[Jürgen Heim]

Hello,

I actually get the following message when I start selclass in cstm Support Tool Manager:

cstm>sc
^-- (SlClass) is currently disabled. --

How can I enable this ?

Thanks in advance
Jürgen

[Rajeev Shukla]

try running
unselall (usal)
uslclass (usc)
first and then run sc

[Norman_21]

Here, the same case:
http://forums1.itrc.hp.com/service/forums/parseCurl.do?CURL=%2Fcm%2FQuestionAnswer%2F1%2C%2C0x4e224b3ef09fd611abdb0090277a778c%2C00.html&admit=716493758+1068455963168+28353475

[Jürgen Heim]

thanks for your input,
I tried both, restart diagmond and unselall (also disabled) but unfortunately nothing fits.

Do you have another idea ?

Juergen

[Thayanidhi]

Hi,

By mistake if you disconnect the system using "ds" the select class (sc)
will be disabled. You connect again and make it current using "cs" & "scs".

See example below

# cstm
Running Command File (/usr/sbin/stm/ui/config/.stmrc).

-- Information --
Support Tools Manager


Version A.30.00

Product Number B4708AA

(C) Copyright Hewlett Packard Co. 1995-2001
All Rights Reserved

Use of this program is subject to the licensing restrictions described
in "Help-->On Version". HP shall not be liable for any damages resulting
from misuse or unauthorized use of this program.

cstm>ds
-- Disconnect Systems --
Host Information
System to Test OS Revision Status
* 1 hpux11i HP-UX B.11.11 Current
Enter selection [done]:

cstm>sc
^-- (SlClass) is currently disabled. --

cstm>cs
-- Connect to Systems --
Available Commands:
Add - To add to list but not select
Delete - To delete from list
Cancel - Cancel this operation
OK - Close the dialog
Host Information
System to Test OS Revision Status
1 hpux11i HP-UX B.11.11
Enter selection [done]: 1
Host Information
System to Test OS Revision Status
* 1 hpux11i HP-UX B.11.11
Enter selection [done]:

-- Connection logon for all selected systems --
Logon Name: [root]
Logon Password: []
cstm>scs
-- Select Current System --
Available Commands:
Add - To add to list but not select
Delete - To delete from list
Cancel - Cancel this operation
OK - Close the dialog
Host Information
System to Test OS Revision Status
1 hpux11i HP-UX B.11.11 Connected
Enter selection : 1

-- Updating Map --
Updating Map...
cstm>sc
-- Select Class of Devices --
Devices [Device Type/Device Qualifier]:
1 Adapter/Bus
2 Disk/CDROM
3 Disk/Hard
4 Interface/Centronics
5 Interface/Keyboard
6 Interface/LAN
7 Interface/SCSI
8 MUX/AP
9 MUX/NIO
10 Memory/Memory
11 Processor/CPU
12 Tape/DDS
Enter selection [done]:

Regards

T

[Jürgen Heim]

Thayanidi,

if I try to connect a system I get the message:
cstm>cs
-- Connect to Systems --
Available Commands:
Add - To add to list but not select
Delete - To delete from list
Cancel - Cancel this operation
OK - Close the dialog
Host Information


-- Connection logon for all selected systems --
Logon Name: [root]
Logon Password: []
-- Error --
The following systems could not be connected:
[servername]


Juergen