December HP-Ux Patch Bundles on HP-Unix 11.0 giving " prefetch lenght " error

[Naveen Shetty]

Hi ,

Kindly if someone can suggest me with the solution for this .

Once I apply December Bundle patch on HP-Unix 11.0 i.e XSWGR1100 , I am getting an error in the syslog as follows :

"btlan3 : Unable to setup read/write prefetch length "

This is happening in all the machines where Dec 2000 Patch bundles are applied .

There is no problem being observed , but what does this message indicate to.


Thanks & Regards ,


Naveen Shetty.

[Dan Hetzel · Accepted solution]

Hi Naveen,

The btlan3 issue you mention is solved since patch PHNE_21687.

The latest superseeding patch is PHNE_22244.

You'll find it in the following ftp directory: ftp://ftp.itrc.hp.com/hp-ux_patches/s700_800/11.X/

Best regards,

Dan

[Naveen Shetty]

Thank you Darel for your quick reply .

I am delighted . I will install this patch & check out .

Thanks once again.

Naveen Shetty

[Dan Hetzel]

Hi Naveen,

Here is a link that may interest you.
http://forums.itrc.hp.com/cm/QuestionAnswer/1,1150,0x295e37f45ef7d4118fef0090279cd0f9,00.html

Dan

PS: By the way, my name is Dan, not Darel ;-)

[Joseph C. Denman]

It does not cause any problems...except that the error is there.

Have a good SA Day.

[Naveen Shetty]

Hi All ,

Hi Dan , Sorry your name was wrong metioned by me as darell .

Thanks once again Dan .

Naveen Shetty.