decserver and ddfa

[BEDU]

Hi my lords,

I want to configure ddfa on a HP-UX 11.11 server with a decserver and have problems.

I follow the documentation, all seems to be good, but on the printer i find these lines :

unknown host
printer « LSTETU1 » now disabled

The queue was created by : lpadmin -pLSTETU12 -v/dev/telnet/s2s1port11 -mrmodel on a host named priam

here is the /etc/ddfa/dp :

172.25.20.200 XX/2011 /dev/telnet/s2s1port11 /etc/ddfa/pcf

172.25.20.200 is the IP address of the decserver (Decserver 900TM with NAS 2.3A) and the printer is connected on the port 11.

I've verified that the decserver ping the HP host.

What is wrong ?.

[Allan Bowman]

How have you configured the port on the DECserver? My guess is that the default configuration will not work. Can you post the port configuration here?

Allan in Atlanta

[BEDU]

Hi,

here is the configuration on the decserver :

Local> show telnet listener 2011 char


Listener TCP-port: 2011 Listener Type: TELNET
Identification: Etudes Listing
Ports: 11
Connections: Enabled
IP Address: 172.25.20.200

Local>

Local> show port 11


Port 11: imp 5 Server: S2S1

Character Size: 8 Input Speed: 9600
Flow Control: XON Output Speed: 9600
Parity: None Signal Control: Disabled
Stop Bits: Dynamic Signal Select: CTS-DSR-RTS-DTR

Access: Remote Local Switch: None
Backwards Switch: None Name: 11
Break: Local Session Limit: 1
Forwards Switch: None Type: Hard
Default Protocol: LAT Default Menu: None
Autolink Timer One:10 Two:10 Dialer Script: None

Preferred Service: None
Authorized Groups: 0
(Current) Groups: 0

Enabled Characteristics:
Loss Notification, Message Codes, Output Flow Control, Verification

Local>

In my mind the configuration is OK because i've defined a printer on this decserver and it works.

Local> show printer LSTETU1

Printer: LSTETU1 Header Page: Disabled
Connections: Enabled Trailer Page: Disabled
Flag Page Type: ASCII Auto C/R: Enabled
Identification:
Flag Page Note:
Ports: 11


Local>

It does not work for ddfa only.

Thanks