diaglogd

[Michael Palmgren]

Hi, can some one help me with this. I can start
deamond diaglod, I have try to do it with
STM but that's not working I have also try
to stop end start /sbin/init.d/diagnostic.

/Michael

[Uday_S_Ankolekar]

You want to start disgnostic then in /etc/rc.config.d/diagnostics file must have DIAGNOSTICS=1 .

-USA..

[Andrew Merritt_2]

Hi Michael,
I assume you mean you can't start diaglogd. Is anything logged in syslog when you try to start diaglogd?

What version of OnlineDiags do you have installed?

in STM, does the System Activity log show any errors for diaglogd?

Are the other daemons running (diagmond, memlogd)? What about the monitors? (/usr/sbin/stm/uut/bin/tools/monitor/*)?

When did the problem start? Has diaglogd ever run, if so, what changed?

Andrew

[Michael Palmgren]

Hi!
File /etc/rc.config.d/diagnostic DIAGNOSTICS=1
Message in syslog
Dec 5 15:33:43 n09000 vmunix: The diagnostic logging facility has started re
ceiving excessive
Dec 5 15:33:43 n09000 vmunix: If the diaglogd daemon is not active, use the
Daemon Startup command
Dec 5 15:33:43 n09000 vmunix: If the diaglogd daemon is active, use the logt
ool utility in stm
This process is up /usr/sbin/stm/uut/bin/sys/diagmond
Yes dialogd has been up
stm log
Mon Dec 13 13:11:36 2004: Daemon process (diaglogd) with process identifier
(1244) exited.

Mon Dec 13 13:11:36 2004: Daemon process completed with exit_status SUCCESSFUL
(0) indicating process completed without errors.

Mon Dec 13 13:11:36 2004: Daemon process (diaglogd) will not be restarted as
restart attempts have exceeded the maximum allowed
(5). Start daemon process manually using User
Interface.
Release
OnlineDiag B.11.00.14.14 HPUX 11.0 Support Tools Bundle


Regards
Michael

[Andrew Merritt_2]

Michael,

> OnlineDiag B.11.00.14.14 HPUX 11.0 Support Tools Bundle

That's a very old version of OnlineDiags, A.22.00 from September 2000 (See http://www.docs.hp.com/hpux/onlinedocs/diag/stm/stm_upd.htm#table).
You will not get any support from HP on that version. There have been so many changes and bug fixes since that release that it is not worth trying to troubleshoot with that version.

I would recommend upgrading to A.44.00, the March 2004 release, which is available from the ITRC, I believe. Once that's in place (and you should also check your general patch levels), you should install the latest patch for the version, which is currently PHSS_30890.

See http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

If, after the upgrade, there are still problems, then it would be worth investigating further.

Andrew

[Michael Palmgren]

Thanks

[Andrew Merritt_2]

Michael,
Please consider assigning points to the replies you've had to your questions.

This has two functions; firstly, it helps others who may have the same problem as you to find an answer, by seeing which answers were most helpful.

Secondly, it helps to reward those who take the time to respond to questions by giving them recognition for the help they provide.

Andrew