Disk is not seen in ioscan output

[titu]

Hi all ,

I am not able to see the eva 3000 disk in my ioscan output same disk is visible connected with other system.

output of ioscan and fcmsutil is attched here as attachment.

help on this

thanks in advance.

titu

[titu]

sorry forgot the output of ioscan.

here is the output of oiscan as attachment.

thanks

titu

[Torsten. · Accepted solution]

Your ioscan lists only the internal disks and the VA7xxx LUNs.

Make sure the switch zoning and the eva vdisk presentation are correct to allow this server to access the devices.

Keep in mind, that if the eva3k is still active/passive you'll need additional software on your server!

[Sajjad Sahir]

from where u added disk
u used ioscan -funC disk then i am seeing all disks are claimed u told one of the disk is not showing ok.
once u added didk from eva
u used insf -e disk command
can u use insf -e command again

[Safarali]

Hi titu

First check your host is connected with FC cable with your eva are you able to present the disk beforeif yes
then go to sam select the disk option and you can see unused disk with your lun number

Regards
Safar

[Rasheed Tamton]

Hi Titu,

Please make sure your zoning is ok. Hope you already presented the correct host from the EVA admin side.

Regards.