HPE Community
Operating System - HP-UX
1836302 Members
1721 Online
110099 Solutions
New Discussion

Disk showing as NO_HW OFFLINE

 
TechC
Regular Advisor

‎12-14-2012 09:26 AM

‎12-14-2012 09:26 AM

Disk showing as NO_HW OFFLINE

Hello,

 

I replaced a mirrored boot disk in an rx8620 running HP-UX 11.31. I first removed the logical volume copies from the disk, then vgreduced the disk from the group.

 

After this I swapped the disk hot.. and my replacement disk shows up under the same lun path as OFFLINE NO_HW.

 

 

What commands to I use to make the disk accessible to the system?

 

Thanks

 

0 Kudos
Reply
2 REPLIES 2
Ajin_1
Valued Contributor

‎12-19-2012 01:41 AM

‎12-19-2012 01:41 AM

Re: Disk showing as NO_HW OFFLINE

Hi

 

Its configured with HW Raid or Software Raid?

Thanks & Regards
Ajin.S
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎12-19-2012 02:01 AM

‎12-19-2012 02:01 AM

Re: Disk showing as NO_HW OFFLINE

I think I already answered to this question (other thread?) ...

You need to work with "scsimgr replace_wwid..." - the syslog entry should tell you.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.