disks status

[kacou]

With the ''VGDISPLAY '', i have the message below. is there an error in the LV Status, VG Status, LV Size ?


--- Logical volumes ---
LV Name /dev/vgccb/lvhome
LV Status available/syncd
LV Size (Mbytes) 20000
Current LE 5000
Allocated PE 5000
Used PV 1

LV Name /dev/vgccb/lvcdrs
LV Status available/syncd
LV Size (Mbytes) 100000
Current LE 25000
Allocated PE 25000
Used PV 1


VG Name /dev/vgccb
VG Write Access read/write
VG Status available, exclusive
Max LV 255
Cur LV 6
Open LV

[Ivan Krastev]

Nothing unusual.
If you are concern about any disk issues check syslog and dmesg.

regards,
ivan

[SUDHAKAR_18]

Hi,

No problem with your command o/p.

Regards,
SHR

[Torsten.]

Scroll down if you see an "unavailable" status. In the output you posted is no error visible.

Take care, /dev/vgccb is probably part of a cluster.

[Mustafa Gulercan]

hi;
everything is fine.
vg status exclusive means that more than one nodes can read the vgccb.

i suppose there is an active passive cluster system you have.

regards,
mustafa

[Jeeshan]

which one pinned you to go decision like "error".

your output doesn't show any unusual findings.