Operating System - HP-UX
1832910 Members
2978 Online
110048 Solutions
New Discussion

displaying the contents of auto file

 
SOLVED
Go to solution
Ali Imran Abbas
Regular Advisor

displaying the contents of auto file

How can we display the contents of auto file. I am replacing a problem disk in mirrored root volume group and I wanna know if the already disk in the mirror is configured with -lq option or not?

4 REPLIES 4
James R. Ferguson
Acclaimed Contributor
Solution

Re: displaying the contents of auto file

Hi:

# lifcp /dev/rdsk/cXtYdZ:AUTO -

Regards!

...JRF...
Torsten.
Acclaimed Contributor

Re: displaying the contents of auto file

For Integrity:

# efi_cp -d /dev/rdsk/c2t1d0s1 -u /EFI/HPUX/AUTO /tmp/AUTO.pri

# cat /tmp/AUTO.pri

(assuming your disk is c2t1d0)

Boot string should be

"boot vmunix -lq"

here.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Avinash Agarkar
Valued Contributor

Re: displaying the contents of auto file

#lifcp /dev/rdsk/cXtYdZ:AUTO -

Thanks,
Avinaash
Great Power Comes With Great Responsibility
Torsten.
Acclaimed Contributor

Re: displaying the contents of auto file

Copy and paste, Avinaash?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!