DLT configuration

[bernard_4]

Hi all, need some help here.

I have 2 N class, 1 L class that's attach to a Brocade switch.. and a 6/100 DLT lib attach to it as well..

after hooking everything up... the L class was able to see the tapes.. but the 2 Ns are not able to see them.. ioscan does not show them at all..

are there any patches out there that i should know of.. or anything that i might have missed out..

any insights is well appreciated.. thanks in advance.. write me if u can.. bernard_wk@yahoo.com

[Paula J Frazer-Campbell]

Hi
Have you tried dropping the L Class server out of the connection equation.

[Paula J Frazer-Campbell]

Hi
Have you tried dropping the L Class server out of the connection equation.

[Paula J Frazer-Campbell]

Hi
Have you tried dropping the L Class server out of the connection equation.

[Paula J Frazer-Campbell]

Hi
Have you tried dropping the L Class server out of the connection equation.

[Paula J Frazer-Campbell]

Hi
Have you tried dropping the L Class server out of the connection equation.

[Paula J Frazer-Campbell]

OOPS

SORRIEEEEEEE

[bernard_4]

Turns out to be a patch issue.. the matter has been resolved.. thanks everyone..

[bernard_4]

Turns out to be a patch issue.. the matter has been resolved.. thanks everyone..