Do not see 4-port network card with ioscan

[dictum9]

Any idea why I cannot see this 4-port NIC?

sgtest1:/#: ioscan -fnC lan
Class I H/W Path Driver S/W State H/W Type Description
==================================================================
lan 0 0/0/0/0 btlan CLAIMED INTERFACE HP PCI 10/100Base-TX Core
sgtest1:/#: uname -a
HP-UX sgtest1 B.11.23 U 9000/800 576790538 unlimited-user license
sgtest1:/#:
sgtest1:/#: model
9000/800/A500-5X

[Adam W.]

Where are you unable to "see" it? Because according to your output above, you can see it.

[Duncan Edmonstone]

probably you don't have the correct driver installed.

what OS version?

what model number of card?

HTH

Duncan

[Torsten.]

Any UNKNOWN UNCLAIMED devices in ioscan?
The driver is probably missing.

[TTr]

The 0/0/0/0 is the core LAN card so that is not the problem.
A common problem with the A500 servers (and all rp24xx servers), is the pci card cage. When you install card you have to remove the PCI cage and when you re-install the cage it does not always sit properly and you do not see any of the cards that you installed. Take a look at the ioscan listing, if you are missing any hardware paths that start with 0/2, 0/4, 0/6, these are all "ba", bus adapters on the cage, then the entire pci cage is not installed properly or it got damaged. Compare the ioscan listing with that of another A500 if you have one.