Documents Guide VPAR Manager

[Eli Daniel]

Hi,
i need modify the memory in the VP.

The Host server is RX7640. The server have 4 VPar

i need quit memory in the VPAR 1 and assinged more memory in the VPAR 2

Any know procedure? or manual HP VP?

Thanks

[Berd]

Eli,

You will firstly need to identify memory components you wish to move using vparstatus, and then deallocate using vparmodify with a -d option, and the add to required partition with vparmodify -a option.

HTH

Berd

[Torsten.]

Do you have dynamic memory?


If not, stop the first vPar, reduce the memory, start again.

Then stop second vpar, add memory and start again.

[Eli Daniel]

How can see memory dynamic or not?

[Eli Daniel]

this change do as loggin in the VPar1? in the case the quit memory.

where do loggin to change memory?

[Torsten.]

You can do the modification from any running vPar.

[Eli Daniel]

Torsten, I have VPAR modify down? or I can VPAR start?

[Eli Daniel]

The Version VPar.

SAPL917:/> vparstatus -V
Version 2.0

[Eli Daniel]

anex example:

the vpar SAPL917 has 10 GB
the vpar SAPL930 has 4 GB

I need delet 6 gb from SAPL917
The VPAR SAPL917 before change:
SAPL917 4 GB

I need add 6 GB from SAPL930
The VPAR SAPL930 before change:
SAPL930 10 GB

commands apply:
vparmodify -p SAPL917 -d cell:0:mem:6144

vparmodify -p SAPL930 -a cell:0:mem:6144

This correct?

[Berd]

Eli,

You are missing a colon in the vpar commands, and you can also specify FLOAT if the memory is not cell local

vparmodify -p vpar1 -d cell:6:mem::32768:FLOAT

vparmodify -p vpar2 -a cell:6:mem::32768:FLOAT

Regards,
Berd

[Eli Daniel]

Berd, I dont understand the command "FLOAT"

[Torsten. · Accepted solution]

This is dynamic memory, you should read the chapter

Memory: Concepts and Functionality

in admin guide!

[Eli Daniel]

Torsten,

I need quit 6 GB to Vpart SAPL917

I need add 6 GB to Vpart SAPL930

anex:
SAPL917:/> vparstatus
[Virtual Partition]
Boot
Virtual Partition Name State Attributes Kernel Path Opts
============================== ===== ============ ======================= =====
SAPL930 Up Dyn,Auto,Asr /stand/vmunix -lq
sback900 Up Dyn,Auto,Nsr /stand/vmunix -lq
SAPL916 Up Dyn,Auto,Nsr /stand/vmunix -lq
SAPL917 Up Dyn,Auto,Nsr /stand/vmunix -lq

[Virtual Partition Resource Summary]
CPU Num Num Memory Granularity
Virtual Partition Name Min/Max CPUs IO ILM CLM
============================== ======= ==== ==== ========== ==========
SAPL930 4/ 4 4 4 128 128
sback900 2/ 4 2 4 128 128
SAPL916 2/ 4 2 4 128 128
SAPL917 2/ 4 2 4 128 128

Memory (MB)
ILM CLM
# User # User
Virtual Partition Name Ranges/MB Total MB Ranges/MB Total MB
============================== ====================== ======================
SAPL930 0/ 0 4095 0/ 0 0
sback900 0/ 0 5120 0/ 0 0
SAPL916 0/ 0 12668 0/ 0 0
SAPL917 0/ 0 10240 0/ 0 0

[Eli Daniel]

this change could be online?

[Torsten.]

Non floating (non dynamic) memory cannot be changed online.

[Berd]

Eli,

Try vparstatus -v, this will show if you have any floating memory.

Berd

[Eli Daniel]

Yhanks
the command apply:

vparmodify -p SAPL917 -d mem::6144
vparmodify -p SAPL930 -a mem::6144

the change suscesfully