Operating System - HP-UX
1824033 Members
3793 Online
109667 Solutions
New Discussion юеВ

Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

 
Sammy_2
Super Advisor

Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

When i goto SAM to add users, I don't see the title "Acct for users and group" anywhere? The first heading is "Auditing and Security" (see below) ? why?

I think I got the latest patches.
Patches
==========================================
Gold Base Patches for HP-UX 11i v1, Dec 2004
Gold App patches Dec 2004
Hardware Enablement Patches for HP-UX 11i v1, Dec 2004
Feature Enablement Patches for HP-UX 11i, Sept 2002
Required Patch Bundle for HP-UX 11i, June 2003

===============================================


(brand new server) Hpux 11.11 on hp9000/rp4440

SAM's screen output
=======================================
SAM Auditing and Security ->┬│┬│ SAM Backup and Recovery - ┬│┬│ SAM Disks and File Systems ->
SAM
good judgement comes from experience and experience comes from bad judgement.
7 REPLIES 7
Patrick Wallek
Honored Contributor

Re: Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

Are you signed on as root? You're not using restricted SAM are you?

The "Accounts...." section definitely still exists in 11.11. I know I've got it on several machines.
Sammy_2
Super Advisor

Re: Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

I am root. That is the only acct I got on this machine since this is the only machine recently built. How can I check if root is not using restricted shell ? I know 11i has acct.and users. I got it on very similar box running 11i.
good judgement comes from experience and experience comes from bad judgement.
Patrick Wallek
Honored Contributor

Re: Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

You might try invoking 'sam -r', select the root user, enable all areas for root and the save that setup for root.

Sammy_2
Super Advisor

Re: Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

I tried but sam screen won't paint as it is hung on "working..." for a long time.

sam -r worked on another similar 11i box (which show "acct" in SAM). But even in there, for under users priveleges, I dont see root user. (but I see all others.).
BTW, I closed the other thread to avoid confusion.
Thanks
good judgement comes from experience and experience comes from bad judgement.
Sammy_2
Super Advisor

Re: Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

I see the following message in /var/sam/log/samlog when I launch sam. wonder if it means anything


@!@4@1107472652@0
Executing the pre-condition command for \"Groups\" to determine if it should
be listed in SAM's list of areas.
@!@4@1107472652@0
Executing the following command:\C/usr/sam/lbin/ug_area_vis\C
@!@8@1107472652@0
Entering Task Manager with task UG_GET_RC_PARAMS.
@!@16@1107472652@0
An infrastructural error message for [error code 80054, location ../prod4/Ros
eville/intermed/arch_scan.C:721] was not found in the internal error table.Lo
cation: arch_err_handler.C:256Error Code: 5000
good judgement comes from experience and experience comes from bad judgement.
Sammy_2
Super Advisor

Re: Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

I ran
"swlist -l fileset -a state" and some of the SAM patches were in installed state. I ran swconfig to change them to configured state and all worked fine. I can see acct. now.
Thanks
good judgement comes from experience and experience comes from bad judgement.
Sammy_2
Super Advisor

Re: Don't see "Account for Users and Groups" in SAM, HPUX 11i ?

Patches were in installed state. ONce I swconfig \*. all was fine.
good judgement comes from experience and experience comes from bad judgement.