DRD - i created a clone disk now i want a clone of the clone disk

[Jeff Bruce]

So i have a BL860c i4 that has service guard installed and on this system i have two vpars/packages running. I would like to DRD the vpar/package boot disk but if i run drd now it uses the boot image from the VSP which has service guard. below is drd status. I would like to clone disk110. 

root@vsp25-1:/> drd status

======= 06/16/17 10:10:14 EDT BEGIN Displaying DRD Clone Image Information (user=root) (jobid=vsp25-1)

* Clone Disk: /dev/disk/disk110
* Clone EFI Partition: AUTO file present, Boot loader present
* Clone Rehost Status: SYSINFO.TXT not present
* Clone Creation Date: 04/29/15 14:25:56 EDT
* Last Sync Date: None
* Clone Mirror Disk: None
* Mirror EFI Partition: None
* Original Disk: /dev/disk/disk1
* Original EFI Partition: AUTO file present, Boot loader present
* Original Rehost Status: SYSINFO.TXT not present
* Booted Disk: Original Disk (/dev/disk/disk1)
* Activated Disk: Original Disk (/dev/disk/disk1)

[Torsten.]

I think you can't.

AFAIR you can specify a target, but the source will be the running system.

If you clone to a SAN LUN, your array maybe can clone the LUN you used as a target.

[Jeff Bruce]

the disk110 is a SAN lun 

[Torsten.]

So consider to use your SAN administration tools to create a snapshot (clone) of this LUN.