HPE Community
Operating System - HP-UX
1846480 Members
2313 Online
110256 Solutions
New Discussion

DTC printers

 
SOLVED
Go to solution
John Fusek
Occasional Contributor

‎07-18-2003 12:43 PM

‎07-18-2003 12:43 PM

DTC printers

We are migrating from the HP3000. We have many serial devices hooked to DTC16RXs. I just sat down to configure one of these printers on one of HP-UX boxes and I cannot find where to start. I have searched hpdocs and the ITRC with no luck. Would someone please point me to right place to find the procedure to do this?

There is no problem that cannot be solved by the application of a sufficient amount of high explosive.
0 Kudos
Reply
1 REPLY 1
Bill Hassell
Honored Contributor

‎07-18-2003 06:51 PM

‎07-18-2003 06:51 PM

Solution

Re: DTC printers

You'll first need to add the DTC support utilities to HP-UX and make sure you can manage the DTC's from HP-UX. The follow the instructions found here:

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B1030-90002/B1030-90002_top.html&con=/hpux/onlinedocs/B1030-90002/00/00/26-con.html&toc=/hpux/onlinedocs/B1030-90002/00/00/26-toc.html&searchterms=hp-ux%7cprinter%7cdtc&queryid=20030718-204848

(sorry for the really ugly URL) Or you can find this doc by searching docs.hp.com with the keywords: dtc hp-ux printer


Bill Hassell, sysadmin
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.