DTC / Terminal Configuration

[Shawn Miller_2]

I have just installed a DTC 72MX to download it's configuration from an N class server 11.00. I now have a DTC> prompt. What needs to be down so I get a login: prompt from my N.

[harry d brown jr]

Shawn,

Take a look at:

http://www.hp.com/products1/mpeixservers/info_library/networking/net2/dtc72mxds.pdf

and

http://docs.hp.com/cgi-bin/doc3k/B3202290034.15956/42

live free or die
harry

[Sanjay_6]

Hi Shawn,

Try ? at the DTC prompt for help. I dopn't know anything about DTC, but anyway give it a try. While you are at ir, try "telnet server_ip" or "rlogin server_ip"

Hope this helps.

Regds

[Pepe Jimenez Muñoz · Accepted solution]

To obtain a login in the terminal:

# dtcconfig

Select Modify DTC configuration

enter the DTC name

Select the board and port to configure.

Press F5 and Select Configure Port Parameters ..., in the field Default destination enter the IP address of your server. Press F4 to accept.

Press F5 and select Enable Port Options ..., the next fields must be set:

Enable port
Enable Keep Alive
Enable Flow Control

press F4 to accept, F8 twice to quit.

#dtcreset dtcname board_number port_number

and go....