Operating System - HP-UX
1829416 Members
2325 Online
109991 Solutions
New Discussion

Dynamic Root Disk umount issue

 
Jake Easterwood
New Member

Dynamic Root Disk umount issue

I've loaded and started testing DRD. It works fine except for the following.
• When umounting the inactive image, either specified by the drd umount command or during an action that required a umount of the inactive system, the following error occurred:
ERROR: Unmounting the file system fails.
- Unmounting the clone image fails.
- The command "/usr/bin/sh -c
/var/opt/drd/tmp/drdN5lCOg4/.drdvgchangecmd " fails with the return
code 16. The error message from the command is "vgchange: Couldn't
deactivate volume group "drd00":
Device busy
"
Unmounting Inactive System Image failed with 1 error.

The following would not unmount from the servers (using bdf):
/var/opt/drd/mnts/sysimage_001
/var/opt/drd/mnts/sysimage_001/var

Once a drd umount command was given a second time the inactive system would
unmount the above two lvols with no error.
Has anyone seen this??
1 REPLY 1
James R. Ferguson
Acclaimed Contributor

Re: Dynamic Root Disk umount issue

Hi:

This was recently reported/discussed here:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1097791

Regards!

...JRF...