EFI boot loader trouble

[mark.M]

I has rx4640(HP-UXv2).
when rebooting, not auto boot, but
select of EFI shell and /eti/hpux/hpux.efi is
normal booting.

==== rebooting trouble ====

HP-UX Boot Loader for IPF -- Revision 2.025

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...Could not open file vmunix to check for a directory
Could not open vmunix

loading failed

HPUX> showauto
\EFI\HPUX\AUTO => boot vmunix

HPUX> exit
Exiting bootloader.


=== EFI Shell ====

fs0:
cd /etc/hpux/
hpux.efi

Loading.: FS0 HP-UX Boot
Starting: FS0 HP-UX Boot

(C) Copyright 2004 Hewlett-Packard Development Company, L.P.All rights reserved

HP-UX Boot Loader for IPF -- Revision 2.025

Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 8180 MB
loading section 0
................................................... (complete)
loading section 1
............. (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
....
loading MFSFILES directory (bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text:26106K + Data:6265K + BSS:5276K = Total:37648K

Console is on a Serial Device
Booting kernel...

HP-UX will call firmware in physical-addressing mode

Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 8180 MB 8180 MB 8180 MB
Kernel : 8180 MB 8180 MB 8180 MB
User : 7555 MB 6583 MB 6608 MB
-------------------------------------------------------------------------

Loaded ACPI revision 2.0 tables.
NOTICE: cachefs_link(): File system was registered at index 4.
NOTICE: nfs3_link(): File system was registered at index 7.
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/3/1/0
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 0/3/2/0
Boot device's HP-UX HW path is: 0/1/1/0.0.0

System Console is on the Built-In Serial Interface
iether0: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/0
iether1: INITIALIZING HP AB352-60001 PCI/PCI-X 1000Base-T Dual-port Core at hardware path 0/1/2/1
igelan3: INITIALIZING HP A6825-60101 PCI 1000Base-T Adapter at hardware path 0/4/2/0
igelan2: INITIALIZING HP A6847-60101 PCI 1000Base-SX Adapter at hardware path 0/4/1/0
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
Starting the STREAMS daemons-phase 1
Checking root file system.
file system is clean - log replay is not required
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 8376328 Kbytes, lockable: 6169620 Kbytes, available: 7164020 Kbytes

/sbin/ioinitrc:
/dev/vg00/lvol1:file system is clean - log replay is not required
/sbin/krs_sysinit:
* The module 'rng' has been loaded.
* The module 'ipf' has been loaded.

insf: Installing special files for ipmi instance 0 address 250/0

/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
Resynchronized volume group /dev/vg00
Checking vxfs file systems
vxfs fsck: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write)
vxfs fsck: /dev/vg00/lvol1:/dev/vg00/lvol1 is currently mounted
vxfs fsck: /dev/vg00/lvol1:sanity check: /dev/vg00/lvol1 already mounted

Cleaning /etc/ptmp...
(c)Copyright 1983-2003 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2003 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.


RESTRICTED RIGHTS LEGEND
Use, duplication, or disclosure by the U.S. Government is subject to
restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause in DFARS 252.227-7013.


Hewlett-Packard Company
3000 Hanover Street
Palo Alto, CA 94304 U.S.A.

Rights for non-DOD U.S. Government Departments and Agencies are as set
forth in FAR 52.227-19(c)(1,2).

/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)


HP-UX Start-up in progress
__________________________

[Sameer_Nirmal]

This is a known issue which is resolved in EFI bootloader patch.

Install the latest EFI bootloader patch PHKL_34547. This would upgrade the EFI bootloader to ver. 2.028

http://www2.itrc.hp.com/service/cki/patchDocDisplay.do?patchId=PHKL_34547

[mark.M]

i'm now install. but not update
was2[/HP/EFI]# swlist | grep -i PHKL_34547
PHKL_34547 1.0 boot loader cumulative patch