EISA 100Base-T on HPUX11

[Thomas Müller_1]

Hey,
I'm upgradeing a D370/2 to HPUX11.0 (64Bit)
with cold install. But I cannot address the network card (EISA 10/100 Base-T, A3658A).

1.Is there support for the card in HPUX11
64Bit or must I get a new card.
2.We lost the CFG-File f?r the card, where I
get this file (and other requisite files).
3.When I run eisa_config, I get the massage:
"The eisa /dev/eeprom) is not in the kernel"
How can I insert the driver, or where I can
read about.

Thanks in advanced.
Thomas

[Gary Baines · Accepted solution]

we had a similar problem and were told by HP that eisa is not supported at hpux11 64bit, it does work for hpux11 32bit though.

[Thierry Poels_1]

Hi,

sorry, EISA is NOT supported in HP-UX 11.x 64-bit.
So it's up to you to choose for the 32-bit environment (which will become obsolete eventually); or to get another network card.

regards,
Thierry.

[Paul R. Dittrich]

We have that same exact configuration working at 32-bit but I've been told that no EISA devices are supported at 64-bit.

[Jun Wu]

I also upgrade my 10.20 to 11.00 using EISA 100base-T NIC, I see you guys said it can be used in 32-bit. Can anyone tell me how?
Thanks

Jun

[Denver Osborn]

No EISA drivers are available on HP-UX 11.0 64 bit.

Jun,

You'd need to install the drivers for the adapter from the Application CDs for 11.0.

-denver