eisa_config doesn't show scsi card

[Ulrich Tehrani]

Hello,

for testing purposes i reactivated an old D200 Server with an eisa scsi interface.
The interface is in slot 3 but eisa_config shows that the slot is empty.
Who can helps ?

Slot CFG File Contents

0 !HWPC010 HP Series 700 EISA System Board
1 !INP0500 Intel EtherExpress(tm) PRO/100 LAN Adapter
2 !INP0500 Intel EtherExpress(tm) PRO/100 LAN Adapter
3 ** EMPTY **
4 !INP0500 Intel EtherExpress(tm) PRO/100 LAN Adapter


Thanks in advance.


Best regards

Uli

[Massimo Bianchi]

Hi,
eisa cards are supported and works only with 32bit hpux. Check what version do you have:

getconf KERNEL_BITS


For the configuration part, check in these forums, there are a lot of examples for the eisa_config utility.

Massimo

[Tim Sanko]

You might want to run ioscan after reseating the card with the power off.

Tim