EMS Event Notification Value: "MAJORWARNING (3)"

[huongbuixuan]

Hi all
I have a messages every day in syslog.log:
Jun 27 06:32:52 npsc1 EMS [3391]: ------ EMS Event Notification ------ Value: "MAJORWARNING (3)" for Resourc
e: "/adapters/events/FC_adapter/10_8.8.0.0.1" (Threshold: >= " 3") Execute the following command to ob
tain event details: /opt/resmon/bin/resdata -R 222232615 -r /adapters/events/FC_adapter/10_8.8.0.0.1 -n 2222
32584 -a
When I ran recomend command:
npsc1:/var/adm/syslog# dapters/events/FC_adapter/10_8.8.0.0.1 -n 222232584 -a <

CURRENT MONITOR DATA&colon;

Event Time : Thu Jun 27 06:32:52 2002
Hostname : npsc1.sbv.org.vn IP Address : 192.168.1.10
Event Id : 0x003d1a4f2400000000 Monitor : dm_FCMS_adapter
Event # : 4010 Event Class : I/O
Severity : MAJORWARNING

Adapter at hardware path 10/8.8.0.0.1 : FC-SCSI MUX: Unsupported protocol

Associated OS error log entry id(s):
0x3d1a4f2300000000

Latest information on this event:
http://docs.hp.com/hpux/content/hardware/ems/dm_FCMS_adapter.htm#4010

Description of Error:


Unsupported Protocol

Bus : 0x01
Target : 0x06
Lun : 0x00
Qtag : 0xFFFE
Qtag q-type : 0x05
CDB length : 6
CDB : 15100000 1800



Probable Cause / Recommended Action:


A SCSI target device used a protocol that the FC-SCSI MUX
does not support.

This error indicates a SCSI target device malfunction.

Do the following:
1. Verify that the install scripts ran correctly on
the host.
2. Check the FC-SCSI MUX information log to verify
that the latest firmware is installed.

Refer to the Troubleshooting section of the
"Hewlett-Packard Fibre Channel SCSI Multiplexer
Service and User Manual" (p/n A3308-90006) for
details.

3. Verify that the SCSI and FC-SCSI MUX drivers are installed.
4. Verify that the SCSI target device supports standard SCSI
protocols.




v-v-v-v-v-v-v-v-v-v-v-v-v D E T A I L S v-v-v-v-v-v-v-v-v-v-v-v-v



I/O Log Event Information:

Driver Status Code..................: 0x0000000A
Length of Logged Hardware Status....: 0 bytes.
Offset to Logged Manager Information: 0 bytes.
Length of Logged Manager Information: 34 bytes.

Manager-Specific Information:

Raw data from FCMS Adapter driver:
010600FE 05000000 00000000 00000000 00000000 00000000 00000006 15100000
1800

can you tell me what this is?

Thanks

P.S. This thread has been moevd from Disk to HP-UX > sysadmin - Hp Forum Moderator

[Martin Johnson]

Follow the recomendations and make sure you have the latest SCSI patches installed. Your Fibre Channel adapter received a protocol signal it did not understand.

HTH
Marty

[Cheryl Griffin]

Also check the EMS version. There have been constant improvements with supported protocols, reported events, and reduction of some error reporting.

When EMS is updated, Diagnostics and Predictive should also be updated as well as these packages work together.

See http://www.software.hp.com/cgi-bin/swdepot_parser.cgi/cgi/displayProductInfo.pl?productNumber=B6191AAE

Cheers,
Cheryl