EMS Registrar don't work

[Stefano_73]

Hi, I would activate EMS HA monitoring on my RP5430 with HP-UX 11.00. I've installed
EMS-Config.EMS-GUI
EMS-Core.EMS-CORE
EMS-Core.EMS-MX
EMS-MIBMonitor.MIBMON-RUN
The p_client process run but the registrar don't.
I've a message in the client.log which is:
-------------------Start Event--------------------
Event 11 occurred at Tue Feb 3 20:49:10.604138 2004
Process ID: 15422 (/etc/opt/resmon/lbin/p_client) Log Level: Error
rm_client_connect: Failed to connect to ipahv004,
IP address 10.1.10.182, Port 1712: Invalid argument
-------------------End Event----------------------

-------------------Start Event--------------------
Event 2505 occurred at Tue Feb 3 20:49:10.606685 2004
Process ID: 15422 (/etc/opt/resmon/lbin/p_client) Log Level: Error
update_monitors: socket open failed
-------------------End Event----------------------
I control /etc/services and /etc/inetd.conf. This files are correctly configurated.
What cai i do?
Best Regards
Stefano

[Fabio Ettore]

Hi Stefano,

is NIS configured?

Best regards,
Ettore

[Stefano_73]

Hi Ettore, NO NIS is not configured.

Thanks
Stefano

[Robert-Jan Goossens]

Stefano,

What is the output from,

# netstat -an | grep 1712

Robert-Jan

[Stefano_73]

Hi, the output of "netstat -an | grep 1712" command is without entries.

The same for the "netstat -a | grep registar" command.

Also I have executed the inetd -c command for read the configuration.

Thanks
Stefano

[Todd McDaniel_1]

Stefano,

Just checking for completeness...


Do you have something like this in /etc/services?

# grep regis /etc/services
registrar 1712/tcp # resource monitoring service
registrar 1712/udp # resource monitoring service

And some thing like this in /etc/inetd.conf?

# grep regis /etc/inetd.conf
registrar stream tcp nowait root /etc/opt/resmon/lbin/registrar /etc/opt/resmon/
lbin/registrar

[Stefano_73]

Hi Todd, I've controlled "/etc/services" and "/etc/inetd.conf" files and they are correctly configured, like you say.

Thanks
Stefano

[Fabio Ettore]

Stefano, it sounds like something goes wrong during EMS installation. I would suggest you to reinstall the product.

Best regards,
Ettore

[Stefano_73]

Thanks Ettore, where I colud download the depot? In the HP software page I see only the 04 version for HP 11.11 and 11.23. I need the 03.20 fro HP-UX 11.00.

Thanks
Stefano

[Robert-Jan Goossens]

Hi Stefano,

http://www.software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE

Regards and a good weekend,

Robert-Jan

[Stefano_73]

HI, I've installed the B7609BA product. It's the same?

Thanks
Stefano

[Robert-Jan Goossens]

B6191AAE OnlineDiag_11.00.depot

[Stefano_73]

I'm sorry but I don't understand. B6191AAE contain the monitor for package and cluster like B7609BA?

Thanks
Stefano

[Robert-Jan Goossens]

Get a copy of the OnlineDiag Software Depot (SD), which is the delivery vehicle for the Support Tools. This depot contains:
Support Tools Manager (STM), the online diagnostics
EMS Hardware Monitors
Some of the offline diagnostics (to use all the offline diagnostics, you must use the Support Plus Media).
Predict Support (optional)
You can obtain the OnlineDiag depot in two different ways:

The Support Plus Media (CD-ROM) for your operating system.
Via the website "HP Software Depot". Download the appropriate version of the Support Tools depot, for example: HP-UX 11.0, HP-UX 10.20 (S800), or HP-UX 10.20 (S700). See "Downloading Support Tools Over the Web"

http://docs.hp.com/hpux/onlinedocs/diag/st/st_inst.htm