enable ssh on blades

[Grayh]

how to enable ssh on the blade servers

[Patrick Wallek · Accepted solution]

Install it and configure it.

If you have 11.31, it should be installed by default.

If not, get it and documentation here:

http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T1471AA

[Patrice Le Guyader]

Hello,

It's very stange, for me it's full part of HPUX since at least hpux 11.23(even 11.11 but not sure lol).
I've installed both 11.23 and 11.31 on bl860c and I never need to add it, I think you've miss it in the selection of packages in the installation menu.

Hope this helps.
Kenavo
Pat.

[James R. Ferguson]

Hi:

> how to enable ssh ...

Do you mean "make work"?

# man ssh_config

Regards!

...JRF...

[Grayh]

# man ssh_config
No manual entry for ssh_config.


I am running hp-ux 11.23

my swlist


B9073BA B.11.23.08.03.00.22 HP-UX iCOD Instant Capacity (iCAP)
BUNDLE11i B.11.23.0409.3 Required Patch Bundle for HP-UX 11i v2 (B
.11.23), September 2004
Base-VXVM B.04.10.011 Base VERITAS Volume Manager Bundle 4.1 fo
r HP-UX
CDE-English B.11.23.0409 English CDE Environment
CommonIO B.11.23.0712 Common IO Drivers
FDDI-00 B.11.23.01 PCI FDDI;Supptd HW=A3739B;SW=J3626AA
FEATURE11i B.11.23.0712.070 Feature Enablement Patches for HP-UX 11
i v2, December 2007
FibrChanl-00 B.11.23.0712 PCI FibreChannel;Supptd HW=A6795A,A5158A
FibrChanl-01 B.11.23.08.02 FibrChnl;SupptdHW=A6826A,A9782A,A9784A,AB
378A,AB379A,AB465A,AD193A,AD194A,AD300A
GigEther-00 B.11.23.0512 PCI GigEther;Supptd HW=A4926A/A4929A/A609
6A;SW=J1642AA
GigEther-01 B.11.23.0712 PCI GigEther;Supptd HW=A6825A/A6794A/A684
7A/A8685A/A9782A/A9784A/A7109A/AB465A
GuestAVIOStor B.11.23.0806 HPVM Guest AVIO Storage Software
GuestAvioLan B.11.23.0809 HPVM Guest AVIO LAN Software
HPUX11i-OE B.11.23.0712 HP-UX Foundation Operating Environment Co
mponent
HPUXBaseAux B.11.23.0712 HP-UX Base OS Auxiliary
HPUXBaseOS B.11.23 HP-UX Base OS
HWEnable11i B.11.23.0712.070 Hardware Enablement Patches for HP-UX 1
1i v2, December 2007
HostAVIOStor B.11.23.0808 HPVM Host AVIO Storage Software
HostAvioLan B.11.23.0809 HPVM Host AVIO LAN Software
IEther-00 B.11.23.0712 PCI/PCI-X/PCIe IEther
LVMProvider R11.23.009 CIM/WBEM Provider for LVM
OnlineDiag B.11.23.10.05 HPUX 11.23 Support Tools Bundle, December
2007
QPKAPPS B.11.23.0712.070a Applications Patches for HP-UX 11i v2,
December 2007
QPKBASE B.11.23.0712.070a Base Quality Pack Bundle for HP-UX 11i
v2, December 2007
RAID-01 B.11.23.0712 RAID SA; Supptd HW=A7143A/A9890A/A9891A
HPUXBaseOS B.11.23 HP-UX Base OS
HWEnable11i B.11.23.0712.070 Hardware Enablement Patches for HP-UX 1
1i v2, December 2007
HostAVIOStor B.11.23.0808 HPVM Host AVIO Storage Software
HostAvioLan B.11.23.0809 HPVM Host AVIO LAN Software
IEther-00 B.11.23.0712 PCI/PCI-X/PCIe IEther
LVMProvider R11.23.009 CIM/WBEM Provider for LVM
OnlineDiag B.11.23.10.05 HPUX 11.23 Support Tools Bundle, December
2007
QPKAPPS B.11.23.0712.070a Applications Patches for HP-UX 11i v2,
December 2007
QPKBASE B.11.23.0712.070a Base Quality Pack Bundle for HP-UX 11i
v2, December 2007
RAID-01 B.11.23.0712 RAID SA; Supptd HW=A7143A/A9890A/A9891A
SerialSCSI-00 B.11.23.0712 PCI-X/PCI-E SerialSCSI
SysFaultMgmt B.05.00.05.01 HPUX System Fault Management
SysMgmtWeb A.2.2.7 HP-UX Web Based System Management User In
terfaces
T2767AC A.03.50 Integrity VM
USB-00 C.01.04.07 USB Subsystem and Drivers
VMGuestLib A.03.50 Integrity VM Guest Support Libraries
VMKernelSW A.03.50 Integrity VM Kernel Software
VMProvider A.03.50 WBEM Provider for Integrity VM
hpuxwsApache B.2.0.59.01 HP-UX Apache-based Web Server

[Grayh]

when I do ssh from my secure shell client I receive the message

The host x.x.x.x is not reacheble.
The host may be down or may be a problem.....

But I am able to do that via telnet...

So what should I do

[Patrick Wallek]

OK, so go to the link I gave you, download the software and install it.

SSH documentation, including installation instructions is available here:
http://docs.hp.com/en/internet.html#Secure%20Shell

[Grayh]

Hi Patrick,

Thanks for the link.... Now I need to install this on 10 servers.... Is there a simpler way that I can do.. Was just anxious to learn that as well... and try it out


An issue apart from this.... From Tuesday onwardes I will have to maintain IBM servers... So I was thinking if it is ok to post the issues here.... plz advise

[Dennis Handly]

>I will have to maintain IBM servers. So I was thinking if it is ok to post the issues here

Questions about IBM get deleted.
Unless you magically figured out how to install HP-UX on them. :-)

[James R. Ferguson]

Hi:

> Now I need to install this on 10 servers.... Is there a simpler way that I can do.

What's so hard about running 'swinstall'?:

http://h20392.www2.hp.com/portal/swdepot/displayInstallInfo.do?productNumber=T1471AA

Once you download the depot, copy it to the servers necessary and follow the simple installation instructions. No reboot is necessary.

Regards!

...JRF...

[Ganesan R]

Hi,

If you want to install the SSH bundle on 10 servers, keep the depot in one server, register the depot and install on other clients using this network depot.

[Grayh]

I have the following prompt when I login as root

root@hdasgd1#

I want to change it to # ... Could you give me the command plz

[Dennis Handly]

>I want to change it to #

PS1="# "

[VVS]

Change the value of PS1 variable in .profile file in the home directory og the user.

PS1="# "

regards,

VVS

[Ganesan R]

Hi,

After login as root do the following

# vi /.profile (assuming root home dir is /)

look the following line

PS1="$LOGNAME @ `hostname`"

Change this line to

PS1="#"

[Torsten.]

IIRC some threads before you asked something like

I have a prompt "#" and want to have something like

root@hdasgd1#

...

[Grayh]

thanks everyone