ERROR: ENTRY_IO on iodc call, status = +##########

[D Block 2]

I see this error on the console, can someone help me out what this might be?

Is this a GSP or HW issue?

I don't have HP support on this system (A-class).

On the GSP, "CL" command shows:

ERROR: ENTRY_IO on iodc call, status = +4294967291

00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

Main Menu: Enter command or menu >


Firmware Version 40.32

Duplex Console IO Dependent Code (IODC) revision 1

[Cheryl Griffin · Accepted solution]

Update the firmware.
Maintenance and Support for Hp Products -->
Patch Database -->
Firmware -->
Enter your model machine

I entered A400 and found:
s700_800 11.00 rp24xx 43.50 PDC Firmware Patch PHSS_27383 or PHSS_30725

[D Block 2]

I taken action and swinstall'ed the firmware patch. h'mm, but how can I tell what firware the GSP is running or loaded.

can someone point me into the proper COMMAND ? I'm tryed to look and even tryed the XD command. not certain how to proceed.

sorry, but I need some help here again.

telnet Service Processor login:
Service Processor password:




Hewlett-Packard Guardian Service Processor


9000/800/A500-44 System Name: gsp-carol

[Shaikh Imran]

Hi,
Please try VFP and SL Commands to get the GSP firmware revision information.


Regs

[Naveej.K.A]

hi,

Run stm to get all your system information.

STM ---> select the whole system --> Information --> then look out the information of the FRU, GSP core I/O

with best wishes
Naveej

[Naveej.K.A]

sorry for the wrong info.....
GSP firmware version is not displayed with the tool

Login to GSP.
type HE

and it will shown your GSP firmware revision number

with best wishes
Naveej

[Bharat Katkar]

Type
1. Cntrl B to go to GSP menu
2. In GSP menu go to "HE: Main Help Menu" by typing HE
3. The very first line of the Output will show the version and will look like this:

Hardware Revision a5 Firmware Revision E.02.26 Oct 26 2003,23:12:41

Hope that helps
regards,

[D Block 2]

thx, here's the inform on the firmware Revision.

GSP> HE


HE

==== GSP Help ============================================(Administrator)===
Hardware Revision 8 Firmware Revision A.01.09 Mar 20 2000,12:45:29

[D Block 2]

BTW, I did install the patch, and can verify the patch from:

swlist |grep -i pdc

PHSS_30726 1.0 rp24xx 43.50 PDC Firmware Patch