here are the lines where the error occurred:
Configure Loopback interfaces (lo0)
Output from "/sbin/rc2.d/S008net.init start":
----------------------------
ERROR: lo0 interface: ifconfig: check plumbing error: Bad file number
invalid tunable names, tcp_time_wait_interval for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_wroff_xtra for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_old_urp_interpretation for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_keepalives_kill for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_conn_request_max for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_ip_abort_cinterval for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_ip_abort_interval for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_rexmit_interval_min for this modules,
for a list of valid names, use name '?'
invalid tunable names, tcp_ip_ttl for this modules,
for a list of valid names, use name '?'
invalid tunable names, udp_wroff_extra for this modules,
for a list of valid names, use name '?'
invalid tunable names, udp_pass_up_icmp for this modules,
for a list of valid names, use name '?'
invalid tunable names, udp_pass_up_options for this modules,
for a list of valid names, use name '?'
invalid tunable names, udp_def_ttl for this modules,
for a list of valid names, use name '?'
ERROR: Failed to set ndd tunable parameters
"/sbin/rc2.d/S008net.init start" FAILED
Configure LAN interfaces
Output from "/sbin/rc2.d/S340net start":
----------------------------
ERROR: lan0 interface: ifconfig: check plumbing error: Bad file number
ERROR: Failed to add route entry because its interface is not
yet initialized. May need to add this route entry with
a route commad after the interface is up :
add net default: gateway 192.168.150.250: Network is unreachable
"/sbin/rc2.d/S340net start" FAILED
i hope this messages will give you info on the problem.
thanks in advance.
