Error in HPUX 11.23

[Joel23]

My system have this error in the boot procces:

fs0:\> hpux

(c) Copyright 1990-2003, Hewlett Packard Company.
All rights reserved

HP-UX Boot Loader for IPF -- Revision 1.73

Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...
AUTO BOOT> boot vmunix
> System Memory = 1007 MB
loading section 0
.............................................. (complete)
loading section 1
........... (complete)
loading symbol table
loading System Directory(boot.sys) to MFS
....
Loading MFSFILES directory (bootfs) to MFS
............
Launching /stand/vmunix
SIZE: Text:23108K + Data:5574K + BSS:3802K = Total:32485K

Console is on a Serial Device
Booting kernel...


Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 1007 MB 1007 MB 1007 MB
Kernel : 1007 MB 1007 MB 1007 MB
User : 775 MB 641 MB 676 MB
-------------------------------------------------------------------------

Loaded ACPI revision 2.0 tables.
NOTICE: cachefs_link(): File system was registered at index 4.
NOTICE: nfs3_link(): File system was registered at index 7.
Boot device's HP-UX HW path is: 0.0.1.1.0.8.0

System Console is on the Built-In Serial Interface

what is the cause of this error, thanks.

[Adisuria Wangsadinata_1]

Hi,

Which part of the error message above that you found as an error ?

Is the system be able to boot until the login prompt ? Is the system up & running after that ?

I cant find any error on the booting process that you post yet.

Maybe you can describe more details about your enquiry.

Cheers,
AW

[melvyn burnard]

Sorry, but there does not appear to be any error in the details you have given.
Would you care to enlighten us?