Error loading partition

[Bhavin Shah_2]

Hello All,

I hv just confuigured Vpar A.03.02 in a N-class server. System config is - 1*CPU, 1024GB RAM & 2*18GB HDD. I had created a vpar with the foll. command:

vparcreate -p bhavin -a cpu:::1:2 -a mem::1024 -a io:0.0 -a io:0.1 -a io:0.2 -a io:0.4 -a io:0.5 -a io:0.8 -a io:0.0.2.0.6.0:boot -B auto

command executed without any errors but after reboot, i went to ISL prompt i gave command hpux /stand/vpmon the same also executed & i came into MON> prompt their i gave command vparload -p bhavin

but it gave foll. message & came back to MON>

Booting bhavin
Error loading partition

i'm attaching ioscan & swlist o/p of the system. Pl. let me know what cpold be worng with the configuration.

Thanks in advance
Bhavin Shah

[melvyn burnard]

Have you confirmed the firmware version is up to date on the server?
there is a minimum requirement of 41.02 for the N4000/rp7400

[Devender Khatana]

Hi,

Could you explain a bit about the things you are trying to achive by configuring npar in a single CPU system.

HTH,
Devender

[Bhavin Shah_2]

As of now it is 1 CPU will be adding 2 more CPUs in couple of days.

[Bhavin Shah_2]

I have upgraded the PDC firmware to 43.43 but still same problem.