Error Message - dm_chassis

[Faizer]

Hi Gurus
I get the following message.
Additional information:
Also I am having problems with my Ultrium Tape drive giving scsi bolt etc...

[Sanjay_6 · Accepted solution]

Hi,

Take a Look at the link below from ITRC,

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000072401028

The doc id is KBRC00012411

The notes say that this could be a bogus error although it can be somewhat corrected by the latest GSP firmware and latest diagnostics.

Hope this helps.

Regds

[Sanjay_6]

Hi,

The Ultrium drive could be giving scsi lbolts bacause of multiple reasons.

Loose connection on the channel.
Drive reset due to power or something.
Missing latest scsi patch.
SCSI Controller problem / not seated properly.

Simply saying lbolt leaves a large field for guessword. Can you post the error message from the syslog.

Hope this helps.

Regds

[Sanjiv Sharma_1]

Hi Faizer,

Please check these links for dm_chasis error:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=77913
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=179496

Please check these links for the SCSI lbolt:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=437048
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=245486

hth.

[Faizer]

Hi Gurus
Thanks for the links and the advice, The service engineers were saying that the patches need to be applied. This ias per the links also.
regards
Faizer