error message from syslogfile

[Rajendra prasad NVR]

I am getting an error message of single bit error in syslogfile. Many time per day how to rectify it.

[Ivan Krastev]

Can you specify what is exact message ?


regards,
ivan

[Reshma Malusare · Accepted solution]

HI Rajendra,
Please refer follwoing threads.it will help you to solve this problem.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=662097
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=662097
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=662097
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1007859
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=991368

http://www1.itrc.hp.com/service/james/search.do?todo=search&searchtext=single+bit+error&from=forums&submit.x=4&origin=0&wpa=forums1.itrc.hp.com%3A80&submit.y=0&searchcategory=ALL&hpl=1&searchcriteria=allwords&rn=25&source=7000&presort=rank&chkServStor=on&esc=us.support.itrc.hp.com&admit=-682735245+1173871933437+28353475

[Peter Godron]

Hi,
normally nothing to worry, unless the frequency increases, which could indicate corrput memory module.

Please see:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=946790
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=29853

Please also read:
http://forums1.itrc.hp.com/service/forums/helptips.do?#33 on how to reward any useful answers given to your questions.

[Torsten.]

Hi,

read my comments here:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1049776

[Andrew Merritt_2]

What's the exact message you are seeing? What system type and version of HP-UX?

If it's from the OnlineDiags, I suspect you do not have a current version, since individual SBEs are not reported anymore, in which case I'd recommend upgrading to the current version. With a current version, a message about an SBE would be serious, and require replacement of the faulty parts (the message should say all this).

Andrew

[Ashish Parashar]

Hello Rajendra

May be you are talking about Memory single bit error.

Well if its frequency is less then no need to worry because it will corrected automatically.

But you have to check your PDT entries through mstm. if its full then

contact HP for replacing required memory slot.

Regards

Ashish