Error reading device from cmquerycl

[edwin hamers]

I get a strange error when running cmquerycl :

cfiux01:/etc/cmcluster > cmquerycl -C cluscfg -c cfi_productie_cluster -n cfiux01>

Warning: Unable to determine local domain name for cfiux01

Error reading device /dev/dsk/c2t1d0s3 0x8
Note: Disks were discovered which are not in use by either LVM or VxVM.
Use pvcreate(1M) to initialize a disk for LVM or,
use vxdiskadm(1M) to initialize a disk for VxVM.

I could not find any answer on this nice forum.
Any ideas or suggestions?

[Peter Godron]

Edwin,
can you start be looking at:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1004707
and eliminate warnings etc. as per Geoff's post

[Stephen Doud]

What version of Serviceguard are you working with?
# what /usr/lbin/cmcld | grep Date

What disk array type is shared between Serviceguard nodes?

Have you created an volume groups on the array? If so, did you vgimport them on the other server?

[edwin hamers]

Serviceguard 11.16 :
A.11.16.00 Date: 08/30/05 Patch: PHSS_33039

There is a SAN shared between the nodes. (EVa3000)

What i did is as follows :

I made an golden image of 1 of the cluster nodes.
This image i restored to a new server. This new server will be added to the existing 4-node cluster.

I threw away the old cluster config and bin files. Then i ran cmquerycl to create a new cluster config file..

Then i run into errors.
I will follow Peter's advice and work on a few errors. I hope i can fix them.

[edwin hamers]

I was working on eliminating errors, but created more problems ;-)

I added the FQD names in the /etc/hosts file, and as a result Dataprotector stopped working.... DP is very VERY sensitive for host name changes...

So i cannot change the host name (At the moment without FQD). That means the first error cannot be resolved..

About the second error :
Error reading device /dev/dsk/c2t1d0s3 0x8

This error comes from the new node that i want to merge in the existing cluster.
But what does this s3 mean??

This disk /dev/c2t1d0 is the second root disk which i mirrored. Did i forget something?

[Prashanth.D.S]

Hi Edwin,

Seems to be disk issue, can you attach the complete error message ??

Best Regards,
Prashanth

[edwin hamers]

This is the complete error message.
I only get the message which i posted earlier...

Btw, i managed to add this new node to the cluster, and is running ok.
The error does not seem a show stopper...

[Michael Steele_2]

c?t?d?s3 refers to the service partition found on the boot disk of an Itanium / Integrity server. Its also referred to the HPSP. To verify your service partition, as well as the EFI and HP-UX partitions on your boot disks, use the idisk command.

C:\Documents and Settings\mfsteele\My Documents\HP\Mirroring_root_Itanium_1123.htm

# idisk /dev/rdsk/c2t1d0
idisk version: 1.31

EFI Primary Header:
Signature = EFI PART
Revision = 0x10000
HeaderSize = 0x5c
HeaderCRC32 = 0x7a77c6d
MyLbaLo = 0x1
AlternateLbaLo = 0x88bb991
FirstUsableLbaLo = 0x22
LastUsableLbaLo = 0x88bb96e
Disk GUID = 2cac97ce-5953-11db-8001-d6217b60e588
PartitionEntryLbaLo = 0x2
NumberOfPartitionEntries = 0xc
SizeOfPartitionEntry = 0x80
PartitionEntryArrayCRC32 = 0x34a9a13e

Primary Partition Table (in 512 byte blocks):
Partition 1 (EFI):
Partition Type GUID = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Unique Partition GUID = 2cac9972-5953-11db-8002-d6217b60e588
Starting Lba = 0x22
Ending Lba = 0xfa021
Partition 2 (HP-UX):
Partition Type GUID = 75894c1e-3aeb-11d3-b7c1-7b03a0000000
Unique Partition GUID = 2cac9990-5953-11db-8003-d6217b60e588
Starting Lba = 0xfa022
Ending Lba = 0x87f396d
Partition 3 (HPSP):
Partition Type GUID = e2a1e728-32e3-11d6-a682-7b03a0000000
Unique Partition GUID = 2cac99ae-5953-11db-8004-d6217b60e588
Starting Lba = 0x87f396e
Ending Lba = 0x88bb96d

EFI Alternate Header:
Signature = EFI PART
Revision = 0x10000
HeaderSize = 0x5c
HeaderCRC32 = 0x30dcc4f8
MyLbaLo = 0x88bb991
AlternateLbaLo = 0x1
FirstUsableLbaLo = 0x22
LastUsableLbaLo = 0x88bb96e
Disk GUID = 2cac97ce-5953-11db-8001-d6217b60e588
PartitionEntryLbaLo = 0x88bb970
NumberOfPartitionEntries = 0xc
SizeOfPartitionEntry = 0x80
PartitionEntryArrayCRC32 = 0x34a9a13e

Alternate Partition Table (in 512 byte blocks):
Partition 1 (EFI):
Partition Type GUID = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Unique Partition GUID = 2cac9972-5953-11db-8002-d6217b60e588
Starting Lba = 0x22
Ending Lba = 0xfa021
Partition 2 (HP-UX):
Partition Type GUID = 75894c1e-3aeb-11d3-b7c1-7b03a0000000
Unique Partition GUID = 2cac9990-5953-11db-8003-d6217b60e588
Starting Lba = 0xfa022
Ending Lba = 0x87f396d
Partition 3 (HPSP):
Partition Type GUID = e2a1e728-32e3-11d6-a682-7b03a0000000
Unique Partition GUID = 2cac99ae-5953-11db-8004-d6217b60e588
Starting Lba = 0x87f396e
Ending Lba = 0x88bb96d

Legacy MBR (MBR Signatures in little endian):
MBR Signature = 0x6097ac2c

Protective MBR

[Michael Steele_2]

Here's some more information on the HPSP. Its use for diagnostics.

http://www1.itrc.hp.com/service/iv/docDisplay.do?docId=prodITRC%2FDE_SW_UX_swrec_EN_01_E%2FItanium.pdf&admit=-682735245+1164812098279+28353475