HPE Community
Operating System - HP-UX
1834017 Members
2728 Online
110063 Solutions
New Discussion

Re: Error syslog

 
Michael Schon
Advisor

‎06-02-2009 02:22 PM

‎06-02-2009 02:22 PM

Error syslog

In syslog.log is showing the error below, which could be happening?

SCSI: bp: 00000000ec325870
dev: 1f311000
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 00000000e8e71870
dev: 1f462300
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 0000000139ef4870
dev: 1f166400
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 00000000f9065870
dev: 1f453300
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 00000000e4798870
dev: 1f731100
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 000000010e16c870
dev: 1f731000
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 00000000e059f870
dev: 1f792300
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 00000000d730c870
dev: 1f786400
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 00000000d857f870
dev: 1f773300
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 00000000ec72a870
dev: 1f0b5000
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

SCSI: bp: 00000000e46d9870
dev: 1f0b2500
cdb: 28 00 00 00 00 10 00 00 02 00
residual: 400
status: (200) None -- Select Timeout

Thanks.
0 Kudos
Reply
4 REPLIES 4
Steven E. Protter
Exalted Contributor

‎06-02-2009 02:24 PM

‎06-02-2009 02:24 PM

Re: Error syslog

Shalom,

Read this:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1163315

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Reply
Michael Schon
Advisor

‎06-02-2009 02:55 PM

‎06-02-2009 02:55 PM

Re: Error syslog

I execute:
# ioscan -fnC ext_bus
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
ext_bus 0 0/0/1/0/0 c720 CLAIMED INTERFACE SCSI C895 Ultra2 Wide LVD
ext_bus 1 0/0/3/0/0 c720 CLAIMED INTERFACE SCSI C895 Ultra2 Wide LVD
ext_bus 114 0/0/4/0/0.1.23.0.32 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 115 0/0/4/0/0.1.23.0.34 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 116 0/0/4/0/0.1.23.0.36 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 117 0/0/4/0/0.1.23.0.38 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 118 0/0/4/0/0.1.23.0.40 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 119 0/0/4/0/0.1.23.0.42 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 120 0/0/4/0/0.1.23.0.44 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 121 0/0/4/0/0.1.23.0.46 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 30 0/0/4/0/0.1.23.255.0 fcpdev NO_HW INTERFACE FCP Device Interface
ext_bus 47 0/0/4/0/0.1.27.0.32 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 49 0/0/4/0/0.1.27.0.34 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 6 0/0/4/0/0.1.27.0.36 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 11 0/0/4/0/0.1.27.0.38 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 68 0/0/4/0/0.1.27.0.40 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 69 0/0/4/0/0.1.27.0.42 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 22 0/0/4/0/0.1.27.0.44 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 70 0/0/4/0/0.1.27.0.46 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 7 0/0/4/0/0.1.27.255.0 fcpdev NO_HW INTERFACE FCP Device Interface
ext_bus 171 0/0/4/0/0.20.4.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
ext_bus 172 0/0/4/0/0.20.4.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
ext_bus 168 0/0/4/0/0.21.4.255.0 fcpdev NO_HW INTERFACE FCP Device Interface
ext_bus 2 0/0/11/0/0 c720 CLAIMED INTERFACE SCSI C895 Ultra2 Wide Single-Ended
ext_bus 122 0/0/14/0/0.1.23.0.32 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 123 0/0/14/0/0.1.23.0.34 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 124 0/0/14/0/0.1.23.0.36 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 125 0/0/14/0/0.1.23.0.38 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 126 0/0/14/0/0.1.23.0.40 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 128 0/0/14/0/0.1.23.0.42 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 130 0/0/14/0/0.1.23.0.44 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 136 0/0/14/0/0.1.23.0.46 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 138 0/0/14/0/0.1.23.255.0 fcpdev NO_HW INTERFACE FCP Device Interface
ext_bus 58 0/0/14/0/0.1.27.0.32 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 59 0/0/14/0/0.1.27.0.34 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 60 0/0/14/0/0.1.27.0.36 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 16 0/0/14/0/0.1.27.0.38 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 74 0/0/14/0/0.1.27.0.40 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 75 0/0/14/0/0.1.27.0.42 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 27 0/0/14/0/0.1.27.0.44 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 76 0/0/14/0/0.1.27.0.46 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 8 0/0/14/0/0.1.27.255.0 fcpdev NO_HW INTERFACE FCP Device Interface
ext_bus 170 0/0/14/0/0.10.4.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
ext_bus 167 0/0/14/0/0.10.4.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
ext_bus 3 1/0/1/0/0 c720 CLAIMED INTERFACE SCSI C895 Ultra2 Wide LVD
ext_bus 4 1/0/3/0/0 c720 CLAIMED INTERFACE SCSI C895 Ultra2 Wide LVD
ext_bus 166 1/0/4/0/0.10.4.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
ext_bus 165 1/0/4/0/0.10.4.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
ext_bus 5 1/0/11/0/0 c720 CLAIMED INTERFACE SCSI C895 Ultra2 Wide Single-Ended
ext_bus 127 1/0/14/0/0.2.23.0.32 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 129 1/0/14/0/0.2.23.0.34 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 135 1/0/14/0/0.2.23.0.36 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 137 1/0/14/0/0.2.23.0.38 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 139 1/0/14/0/0.2.23.0.40 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 140 1/0/14/0/0.2.23.0.42 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 145 1/0/14/0/0.2.23.0.44 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 146 1/0/14/0/0.2.23.0.46 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 147 1/0/14/0/0.2.23.255.0 fcpdev NO_HW INTERFACE FCP Device Interface
ext_bus 84 1/0/14/0/0.2.27.0.32 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 85 1/0/14/0/0.2.27.0.34 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 86 1/0/14/0/0.2.27.0.36 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 15 1/0/14/0/0.2.27.0.38 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 87 1/0/14/0/0.2.27.0.40 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 88 1/0/14/0/0.2.27.0.42 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 90 1/0/14/0/0.2.27.0.44 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 92 1/0/14/0/0.2.27.0.46 fcparray NO_HW INTERFACE FCP Array Interface
ext_bus 10 1/0/14/0/0.2.27.255.0 fcpdev NO_HW INTERFACE FCP Device Interface
ext_bus 173 1/0/14/0/0.20.4.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
ext_bus 174 1/0/14/0/0.20.4.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
ext_bus 169 1/0/14/0/0.21.4.255.0 fcpdev NO_HW INTERFACE FCP Device Interface

I tried to remove the paths with the command rmsf-k-H , but did not work. Check errors:

# rmsf -k -H 1/0/14/0/0.21.4.255.0
rmsf: Specified hardware path has no devices

# rmsf -k -H 1/0/14/0/0.2.23.0.38
WARNING: The specified hardware path is BUS_NEXUS/INTERFACE type.
This will remove all the devices connected to it.

Discs no more!

How can I identify the problem?
0 Kudos
Reply
Basheer_2
Trusted Contributor

‎06-02-2009 09:09 PM

‎06-02-2009 09:09 PM

Re: Error syslog

For SAN devices/LUNS

your message is indicating timeout for dev

pvdisplay dev
if IO timout is deault, then increase this to 90 secs


samething for the lvdisplay -v
increase the IO timeout to 90 secs.
0 Kudos
Reply
Suraj K Sankari
Honored Contributor

‎06-02-2009 10:10 PM

‎06-02-2009 10:10 PM

Re: Error syslog

Hi,

Why these many NO_HW is showing did you remove any storage from the running system ?

after giving "rmfs" reboot your server.

Suraj
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.