event logs and attention lamp

[Mousa55]

Hello

i have 2 rp8420 ux server dividing to 4 partitions. i am sutdown the server because the power in data center it is down, after that attention lamp it is on in two server in all partition, i am show the event logs from MP but i don't understand something. i am attach the output of " sestem event logs ".
how to clear this attention.
and logs i can clear from " CLR:clear FPL and SEL " from MP and dangers after deleting.

thanks

[Torsten.]

Nothing attached but I assume you will find something like "power loss" in the logs.

No need to clear the logs, if you read them, the attention led will go off.

[Mousa55]

this file

[Mousa55]

Hello

in addition to Attention LED ON, too the remote LED off

plz help me in quickly

thanks and best regards

[Mousa55]

Hi and good morning

why no any response to my question plz replay

thanks and best regards

[Sujeesh T]

The attention LED is glowing because of altert level 3 log in the MP, and it is due to overtemperature.

[Mousa55]

Hi

but in the event logs another message
e.g "ERR_TOC_TASK","ERR_CPU_CHECK_SUMMARY"
ok but how to clear this glowing

THANKS

[skt_skt]

When you read/acknowledge the chassis/console logs, this should be gone.

is this server part of any CRS/Oracle 10g cluster?

[Mousa55]

hello
the overtemp on one server but another server no.
i need to know how clear the attention lamp from 2 server

and the attention LED it is still 2 day glowing
thanks and best regards

[Torsten.]

As mentioned before "if you read them, the attention led will go off.".

How many threads did you open for this?

[Mousa55]

Hi
the new event logs appeared everyday.
if some problems i don't know from where
thanks