HPE Community
Operating System - HP-UX
1832504 Members
4741 Online
110043 Solutions
New Discussion

Re: facing problem while taking ignite backup

 
Torsten.
Acclaimed Contributor

‎09-04-2009 03:57 AM

‎09-04-2009 03:57 AM

Re: facing problem while taking ignite backup

It's always the same

0/4/1/0/4/0: Device at device id 0x610ee4 has disappeared

0/4/1/0/4/0: Device at device id 0x610ee4 is back

disappeared, is back, disappeared again and again.

You need to check what this is and why it is disappearing.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
NEVATDR
Occasional Advisor

‎09-04-2009 04:47 AM

‎09-04-2009 04:47 AM

Re: facing problem while taking ignite backup

Thanks for the response

Yes I agreed with you but I cannot understand why some of the partition is showing I/O error whether there is a hint of damage of the disk or some defragmantation of the disk need to be done. Please suggest me.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎09-04-2009 04:55 AM

‎09-04-2009 04:55 AM

Re: facing problem while taking ignite backup

You received already so many advises about some things to check and information to collect (see TTr's post for example), consider to post some of them ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Sudeesh
Respected Contributor

‎09-04-2009 09:12 AM

‎09-04-2009 09:12 AM

Re: facing problem while taking ignite backup

Hmm ok.. lets analyse this in detail now that we have a clean install.

->Can we find out which process is getting killed due to page I/O error.

Probabaly run ignite backup on one terminal and run "ps -ef|grep -i ignite" on another terminal and append o/p to a file.

Analyse the file and find out matching PID.
The most predictable thing in life is its unpredictability
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.