Operating System - HP-UX
1830795 Members
4113 Online
110016 Solutions
New Discussion

Failed to generate LIF on tape

 
SOLVED
Go to solution
rajesh73_1
Frequent Advisor

Failed to generate LIF on tape

When i am creating ignite backup in HP-UX 11.11 iam getting below error pls any one help me.

System Error, /opt/ignite/bin/make_medialif failed creating boot LIF
9 REPLIES 9
Suraj K Sankari
Honored Contributor
Solution

Re: Failed to generate LIF on tape

Hi,
Looks your Ignite s/w was not installed properly.

I would suggest you to swremove and download then new ver. and swinstall it again.

see this link for more info

http://www.docs.hp.com/en/IUX/

Suraj
Kapil Jha
Honored Contributor

Re: Failed to generate LIF on tape

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1164114

This gonna help you.

BR,
Kapil+
I am in this small bowl, I wane see the real world......
rajesh73_1
Frequent Advisor

Re: Failed to generate LIF on tape

thank you

iam downloading the new patch

and i have one more problem iam compresed one file through tar command but it is not tar below iam mentioned the command and error

Command
tar -cvf /test/test/index_engineering01.dbf.tar index_engineering01.dbf

error

tar: Size of index_engineering01.dbf >= 8GB. Not dumped.
rajesh73_1
Frequent Advisor

Re: Failed to generate LIF on tape

I downloaded the ignite depot

Now iam going to installing the ignite supose if iam removing or installing the new verion it will ask reboot? because i cannot reboot now becauset this is a production server

Regards
rajesh
Kapil Jha
Honored Contributor

Re: Failed to generate LIF on tape

It would not ask for the reboot?

BR,
Kapil+
I am in this small bowl, I wane see the real world......
Torsten.
Acclaimed Contributor

Re: Failed to generate LIF on tape

Normally there is no reboot needed. If this would be required by a patch, the system will tell you.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Michal Kapalka (mikap)
Honored Contributor

Re: Failed to generate LIF on tape

hi,

ignite/ux don't need a reboot for installation.

mikap
rajesh73_1
Frequent Advisor

Re: Failed to generate LIF on tape

thanku very much for all

I reinstalled ignite now it is working fine
rajesh73_1
Frequent Advisor

Re: Failed to generate LIF on tape

thank you very much for support my problem