1832854 Members
3265 Online
110047 Solutions
New Discussion

FIRST_CLUSTER_LOCK_PV

 
SOLVED
Go to solution
melvyn burnard
Honored Contributor
Solution

Re: FIRST_CLUSTER_LOCK_PV

well it depends how you are configuring this.
If you configure the two nodes into the same cluster, this is a two node cluster, and each node is a member and runs hte cmcld daemon and talks to each other. the package you run will hten run on one node, and if that node fails, should switch to the other node if configured to do so.

If you are only configuring one node as the cluster, you have a single node cluster and the applicatin package will not and cannot switch.
It is up to you to define whether you have a single node or two node cluster.

I would also strongly recommend you look at attending one of hte many Hands On With MC/ServiceGuard courses tat are run by HP Education, as this would be invaluable exposure and experience.
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!