HPE Community
Operating System - HP-UX
1822146 Members
4068 Online
109640 Solutions
New Discussion юеВ

Re: format error using DVD +rw

 
SOLVED
Go to solution
KO kwang tae
Advisor

тАО10-09-2005 05:54 PM

тАО10-09-2005 05:54 PM

format error using DVD +rw

hello

please help me~!

i can't use format command. just i can write.

i don't know what happened.

i used it for the first time. so

i replaced DVD, but not working


the following below :

[u3:nmsap:/nms/temip/dccf/log/EMS]#/usr/local/bin/dvd+rw-format /dev/rdsk/c0t0d0
* DVD?W format utility by , version 4.8.
* 4.7GB DVD+RW media detected.
* formatting |:-[ FORMAT UNIT failed with SK=3h/ASC=0Ch/ACQ=80h]: I/O error
[u3:nmsap:/nms/temip/dccf/log/EMS]#
0 Kudos
Reply
2 REPLIES 2
Mugilvannan
Valued Contributor

тАО10-09-2005 06:00 PM

тАО10-09-2005 06:00 PM

Re: format error using DVD +rw

sounds like a faulty drive. how long have you had it? can you possibly return it?
If U need a helping hand, U will find one at the end of your arm
Reply
Arunvijai_4
Honored Contributor

тАО10-09-2005 06:04 PM

тАО10-09-2005 06:04 PM

Solution

Re: format error using DVD +rw

Check with
http://lists.debian.org/cdwrite/2004/06/msg00037.html
http://lists.debian.org/cdwrite/2004/06/msg00075.html

Seems like a faulty drive..

-Arun
"A ship in the harbor is safe, but that is not what ships are built for"
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.