HPE Community
Operating System - HP-UX
1825719 Members
2934 Online
109686 Solutions
New Discussion

Re: frecover errors block checksum mismatch

 
Gerard Val
Occasional Contributor

‎03-01-2002 06:45 AM

‎03-01-2002 06:45 AM

frecover errors block checksum mismatch

when restoring a backup in a continuity centre for a test I get the following errors. I used 2 different tapes, 3 different dlt8000 units.
still the effect is the same:
frecover(1021) block checksum mismatch (4x)
frecover(1020) block checksum mismatch (1x)
frecover(1003) backup id does not match expected value
frecover(1061) attempt to continue recovery with new backup id?(Y/N) Y
frecover(1004) backup time does not match expected value
frecover(1062) attempt to continue recovery with new backup time?(Y/N)

Then nothing happens just to end the process.

What's going on. . . ?
Thanx Gerry
live you're life every day like it's your last one; one day you'll be right
0 Kudos
Reply
1 REPLY 1
Olivier LEGRAND
Frequent Advisor

‎03-01-2002 07:08 AM

‎03-01-2002 07:08 AM

Re: frecover errors block checksum mismatch

Hi Gerard,

Can you give us your command used to restore ?

Regards
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.