frecover not an fbackup volume; unable to read volume header

[Hofman P A]

Hello,

I have a problem with fbackup/frecover without using tapes.

Sometimes fbackup/frecover exits with undermentioned message:

fbackup(1004): session begins on Wed Sep 17 01:30:01 2008
fbackup(3024): writing volume 1 to the output file -
frecover(5418): not an fbackup volume; unable to read volume header
frecover(5414): abort selected
fbackup(9999): Broken pipe
fbackup(3004): writer aborting
fbackup(1002): Backup did not complete : Reader or Writer process exit

This is the script i am using.

CSBU_COMMAND="remsh remotehost -l admin (rm -r /usr1/tmpdata 2>/dev/null;\
mkdir /usr1/tmpdata;\
cd /usr1/tmpdata;\
/etc/frecover -xX -f -)"

/etc/fbackup -f - -0 -u \
-I /csbackupdir/repl.FULL.data.idx \
-g /csbackupdir/repl.FULL.data.sel \
-d /csbackupdir/repl.day \
| $CSBU_COMMAND

Most of the times (runs daily) there is not a problem, but sometimes is fails ... ?

Is there a workaround or patch for this problem.
I use fbackup/frecover instead of rcp to exclude some directory's.

Regards.
Paul

[Kenan Erdey]

Hi,

Please look at the thread:

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=870494

Kenan.

[Hofman P A]

Kenan,

I can not find the solution in this thread.

I have a problem with fbackup/frecover WITHOUT using tapes.

Thanks for responding.
Paul

[Sandeep_Chaudhary]

Plesae read:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1221726624229+28353475&threadId=444308

[Hofman P A]

Undermentionded Fbackup/frecover path was installed, so has to be ok ....

PHCO_36630 1.0 fbackup(1M),frecover(1M) cumulative patch