HPE Community
Operating System - HP-UX
1836475 Members
2208 Online
110101 Solutions
New Discussion

fsck crashes with memory fault

 
Frank Thyroff
New Member

‎09-04-2001 02:41 AM

‎09-04-2001 02:41 AM

fsck crashes with memory fault

Machine (HP UX 10.20) doesn't boot:
Cannot mount /dev/vg00/lvol3.
Run fsck manually.

When using the recovery disk with the recovery shell
fsck gives the following messages:

Support# fsck /dev/rdsk/c0t0d0s2lvm
** /dev/rdsk/c0t0d0s2lvm
** last mounted on /
** Phase 1 - Check Blocks and Sizes
Memory fault
Support#

Any Comments or Suggestions ?

Thanks
Frank
0 Kudos
Reply
2 REPLIES 2
Victor BERRIDGE
Honored Contributor

‎09-04-2001 03:15 AM

‎09-04-2001 03:15 AM

Re: fsck crashes with memory fault

HI,
You havent specified what fs type in your fsck cmd, I would give it a try with also -V and see if it changes anything, if better again less -V...

My 2 cents...

All the best

Victor
0 Kudos
Reply
Sridhar Bhaskarla
Honored Contributor

‎09-04-2001 06:24 AM

‎09-04-2001 06:24 AM

Re: fsck crashes with memory fault

Try with a later version of Support CD.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.