FTAM Error message

[Kamel CHAABENI]

Hi to all,
I have an HP 9000 /887 model runnig HP UX 10.20 with an X25 Inteface installed in and working well. I am using FTAM to transefer files from a GSM switches (for telecommunication billing purpose). the first connection to the first swith is working well but to the second switch i have the following error message:
Pr?sentation generated ACSE provider abort indication received (Log_instance 10184 FTAM error_id 1011 = "Lower layer failure"

i don't have the FTAM Docs :(

Regards

[Alex Glennie · Accepted solution]

This looks possible ?

PROBLEM
I am configuring ACC/X25 to communicate to a remote switch. Whenever I try to
connect to the switch I get the following error:

Presentation generated ACSE Provider abort indication received (log_instance
:142, FTAM error_id 1011 = "Lower layer failure")

I can see that the X25 call is being made, when I trace the connection I can
see an outgoing connect-request at the transport layer and an incoming connect-
confirm, some session PDU's are sent but no replies are received.

CONFIGURATION
HPUX 10.20
S/W ACC/X25
RESOLUTION
The confiugration of the ACC/X25 had a framesize of 1048 configured, this
should have been set to 'framesize 149'. Also, the P, S, & T-selectors should
be set to 0001.0001.0001 to communicate with the siemens responder.