FTAM-X25 AXE-10

[Pham Anh Quan]

hi All,
I have configured ftam-x25 on Hp-ux 11 to AXE-10 (Ericsson tranlocal 6, X25 ) but it do not works ,I use osidiag to diag
In test WAN X25 It give a message
entity: X25
test case: Connection
------------------------------------
x25_addr : 11110203
x25_pid : 03010100
x25_if_name : c1p1
x25_cdata_val :
x25_cdata_file :
x25_calling_nsap :
x25_called_nsap :
x25_use_8878 : N
------------------------------------
connect() errno: 0
recv(*OOB*) errno: 0
05 00 00 42 00 ...B.
close() errno: 0
------------------------------------
out of band event: CLEAR
diagnostic code: 66
meaning: Call Setup Problem - Facility Parameter Not Allowed
clear code: 0
meaning: DTE Originated
------------------------------------
test status: FAILED
operation: recv(*OOB*)
return code: 572


x25: Disconnect indicates error.
Examine the reported out of band event above for the specific causse
of the disconnect.
========================================================================
Standard input: END
110203=adress X25 of AXE

Waiting for your help !
Thanks,
quan

[Jim Keeble]

The AXE may not support or be configured for one of the facilities you defined in the x25config file, window size, throughput class, or packet size.

You may need to take a trace to see whitch facilities are being requested. You can enable packet level tracing in osidiag, or enable it outside osidiag in a different window before running the trace with :

nettl -tn pduin pduout -e SX25L3 -f diag

Trace will be saved in diag.TRC0 or diag.TRC000. (000 is 11i or later)

The binary trace is formatted with:

netfmt -Nl -f diag.TRC0 >diag.fmt

and you can stop the trace with:

nettl -tf -e all.

Hope this is helpful.