1833877 Members
2159 Online
110063 Solutions
New Discussion

FTP between servers

 
SOLVED
Go to solution
Vasikaran Venkatesan
Frequent Advisor

FTP between servers

I have been trying to verify what should be the speed I can expect for a FTP session.

Environment is like between two Superdome partitions running HPUX 11i and networked across the company WAN.

Any numbers from experiences?.

thanks for any help.
4 REPLIES 4
Bharat Katkar
Honored Contributor

Re: FTP between servers

Hi,
It entirely depends on your networking components. Well in 10 MBps Ethernet LAN effective speed is 2 to 2.5 MB/sec.
Regards,
You need to know a lot to actually know how little you know
Steven E. Protter
Exalted Contributor

Re: FTP between servers

This is totally dependent on any factor from wiring quality to brand of switch to load factors from other machines on the network will effect this.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Sajith V Mannadiar
Frequent Advisor
Solution

Re: FTP between servers

Hello Vasikaran,

We have the superdome partitions across a 2Gb/s link and a typical ftp speed is 12 MB/s approx.
Sanjay_6
Honored Contributor

Re: FTP between servers

Hi,

Like it is said, it depends on the network bandwidth and the traffic on the network. we get around 10-15MB/s and have been known to get more.

hope this helps.

Regds